PlanetZ forums - scopeusers.com

Hello to all!

I just want to ask a few questions about some settings in the BIOS:
1) Which BIOS revision are you using?
2) Advanced->Chip Configuration->Graphics Aperture Size: Should I put 64MB here for a Matrox G550 or more? (for better audio performance)
3)UC or USWC for G550?
4)Should the Delay Transaction be enabled or disabled?
5) Advanced->PCI Configuration: PCI/VGA Palette Snoop setting for G550?
6) PCI latency timer setting?
7) Boot-> Plug'n'Play OS enabled or disabled? (for XP standard PC)
Reset Configuration Data: what is that?

Thank you for your help!

1) You can not just use any BIOS. You need to use a BIOS made for your very special motherboard.

2) I would put this to 1/4 of the system RAM (if posible).

5) No

7) Disable

Reset Configuration Data = skip any changes you made after going into the BIOS this specific time.

1) 1009C
2) 64MB
3)UC
4)enabled
5)disabled
6) 32
7) disabled
forget this

Hello!

Thank you guys for replying! I am at the moment downloading the latest drivers for my DAW and a bit later I am going to format my HD and start again from scratch!

I will let you know how it turns out in the end!

Thank you!