has any1 got the Recording Mixer Dev from Luna3?

Akuma · Post by **Akuma** » Thu Sep 26, 2002 11:54 am

its basically the big recording mixer, I dont want to have to install my old CD as I have had my Hard Drive reformatted again and dont want stuff being put into the registry, if so, could you please post or send it to my email which is [email protected]

I would be very grateful if you could.

alfonso · Post by **alfonso** » Fri Sep 27, 2002 7:15 am

isn't it available from the installation files without installing? it should.....

Akuma · Post by **Akuma** » Fri Sep 27, 2002 11:00 am

I deleted the Installation File for Luna 3, I only have 3.1 now, and the Mixers are not the ones that I had. If you remember it was the Big Recording Mixer whereby it had 4AUX send and I think 3 Inserts. If you have it please send it. I have the Luna2 installation CD, however to get the Recording device would require a full installation of the Luna2 drivers, copying the Device over and reinstalling Luna 3.

marcuspocus · Post by **marcuspocus** » Fri Sep 27, 2002 11:24 am

The STM1632 is doing all of this and better? Why do you need the old crappy mixer? Maybe you have a good reason, i just don't know ?

Akuma · Post by **Akuma** » Fri Sep 27, 2002 5:37 pm

Because when I wrote some tunes, I had all the volume levels setup and effects plugins being run etc, various stuff etc, and it was setup in a way so that If I ever wanted to record again, I wouldnt have to mess around with levels and all.

at0m · Post by **at0m** » Fri Sep 27, 2002 9:18 pm

I think Sandrob has the old mixers online somewhere, but i can't see where for now. Anyone else?

alfonso · Post by **alfonso** » Sat Sep 28, 2002 1:13 am

Recording Mixer travelling just now!
but hei akuma, spend a spare hour to set 1632 for recording, you'll not regret....

sandrob · Post by **sandrob** » Sat Sep 28, 2002 7:38 am

only micro and dyna mixers are on-line.
i have pulsar's instalation (with activation key) for rm242 but i don't use that mixer anymore.
i can instal rm242 again and send device to you, but i don't know it will work!?

Akuma · Post by **Akuma** » Sat Sep 28, 2002 8:51 am

Hi. Thanks Alfonso for the Mixer very grateful. But I just released something, the RM242 I was using was Version 2. :S Have you got that one by chance? Only in V2 when you click on the Arrow button to link 2 channels together, you were thne able to use Stereo Insert effects! Compared with this one whereby even though you link them, you had to run 2 Mono inserts one for left & right.

Also another reason why I will be still using this mixer is because it uses less DSP than the STM.

at0m · Post by **at0m** » Sat Sep 28, 2002 11:11 am

http://users.pandora.be/at0m/sfp/RM242.dev

won't be on too long though. And it may be that I saved the device w loads off CC# for remote. You could remove them if desired.

Chill69 · Post by **Chill69** » Sat Sep 28, 2002 1:07 pm

Speaking of mixers and the Luna, did creamware ever release an extremely low footprint mixer for SFP? The big mixer is nice, but I never end up using all of it, maybe only 3-4 Channels (I do a lot of track bouncing so I can run more synths / effects), and something that will allow me to use more DSP for other things would be of great help.

Chris

at0m · Post by **at0m** » Sat Sep 28, 2002 1:36 pm

Of course. Try STM1632 (my personal favorite), or even Dynamixer and Micromixer.
Both have # channels from 4->16, Dynamixer has 2 insert slots, Micromixer has no insert slots. Both DynaMixer and Micromixer don't have Aux -but I think that's not a real problem on 4 channels. If you still want Aux on those, be creative with the Matrix. I don't remember who made it, think it's j9k.

Also Celmo and Spacef have 4-6 channel mixers with an insert slot, 2 Aux, etc. They're Pulsar OS 2.04 devices, but seem to work fine under SFP. Check their websites for more info.

Akuma · Post by **Akuma** » Sat Sep 28, 2002 4:50 pm

Hi Atomic. The file link you gave isnt the Mixer. Its way too big to be the one and also it asks for a Reg key so I assume its a Super Version for Pulsar users. There was a RM242 that came free with the Luna 3 installation and I havent got it anymore, so if anyone who has 3.0 please please send me the RM242 v2 Mixer. I had a whole load of setting and insert effects like compressors etc when I recorded my music and to go thru and set it up again would be a nitemare!

at0m · Post by **at0m** » Sat Sep 28, 2002 4:54 pm

It got big by presets and midi CC#.

I'm not sure, but I think you'l have to give a key for any RM242 you'd receive, just like we had to when we bought it from the shop.

alfonso · Post by **alfonso** » Sat Sep 28, 2002 6:09 pm

sorry akuma, but this is the only one i've got.