Logiquencer freeware

[spacef]

It's available on S|C ftp, in the spacef free plugins sub-folder.
It works with anything that accept audio modulation and audio gate triggers.
It was made for the Korg MS20-mini but works exactly the same with Ocean Swift Synthesis OS20.
It works also as a modulator for filters (for Modular Mixer v1 and v2) , modular patches and so on....

Find it here : https://spacef-devices.com/DOWNLOADS/Logiquencer.zip

I made a small video for it but it is pretty bad I think.... it's a bit out of sync and my haircut is awful.
https://www.youtube.com/watch?v=3gr6W_I ... e=youtu.be

[dawman]

Excellent news and thanks.
I have CF VCF In and CV Trigger In on my SE-02s.
This could be my way of trigger notes or patterns/ARPs/Songs from my K4 instead manually messing around.
The golden rule in performing is keep both hands on your keyboard/zones.

Video was fine, and your handsome as always.
Should use your profile on your gear.
Low angle shot like Mt. Rushmore....

[spacef]

Hi Jimmy, thanks

To work with CV it needs a audio to CV converters. I know that expert sleepers does 1 (the ES3 - adat to CV) for 8 CV.

Are there other ones ?

You don't need an audio to CV converter if the sound card outputs are "DC Coupled" (I think only RME does this), but I think there will also be latency.

[David]

Excellent thanks

[borg]

You don't need an audio to CV converter if the sound card outputs are "DC Coupled" (I think only RME does this), but I think there will also be latency.

iirc, it is MOTU that has DC-coupled outs (on most of their interfaces). Some RME interfaces have their headphone outs DC-coupled. There is a list somewhere on the expertsleepers website.

[dawman]

My ADA8200s are modded by Black Lion Audio and have 16 x DC Coupled XLRs.
We’ll see...

[spacef]

very interesting, i didn't know that company.

[Spielraum]

wow
abgefahren
really great stuff!
cheers ms20 lovers!

[Spielraum]

Ok, now I'd like to ask, ReTrig Manual works, keyboard does not work. (xite-1)
...pci not used yet. did you notice that already?
ps.:
offset 32 works fine to convert bi2uni with -12db for fullrange control inside scope cv-toys

[spacef]

I have just checked and it should work fine. I will check again tomorrow for exact version. Thanks for your patience.

NB : For CV are you talink about bipolar modulator ?

For info, the range of a 3 octave CV Signal (like the one you get by using Expert Sleepers ADAT to CV) is approx the range of the scope signal divided by 3 (approximately). To control the pitch of an oscillator over more than 3 octaves, then you would need to add several CV inputs and make them very precise (for ex, the 1st CV controls octave 0 to 3, and other CV controls octave 4 to 6 - then the work is to find the right method to add both signal so it stays in tune, which means that the second CV must be equal to 0 over the whole range of the first CV. This must be done "after" the Adat to CV conversion because it manages only 3 octaves "no matter what".
A total loss of time for scope though, people can buy a keystep keyboard second hand, it has a CV output and can play the full keyboard range.

For unipolar/bipolar, I confess I do not know what you are talking about

[spacef]

Here is a download for you
https://spacef-devices.com/DOWNLOADS/Logiquencer.zip
I just checked and it works fine with Keyboard retriggering. It is the latest version that I Have

[Spielraum]

... For unipolar/bipolar, I confess I do not know what you are talking about

he is about CV abuse

Here is a download for you...

thx man, you make me happy \o/