Page 1 of 1
					
				Expression Pedal Split
				Posted: Fri Jun 09, 2017 10:44 am
				by yayajohn
				Is it possible to split an expression pedal signal like with a Y adapter into 2 signals?
			 
			
					
				Re: Expression Pedal Split
				Posted: Fri Jun 09, 2017 1:29 pm
				by Marco
				I guess with a Midi thru box, yes you can split. I did this with 4 Midi connections and a soldering the Kabels together in Y! Works. But today a splitter is cheap.
			 
			
					
				Re: Expression Pedal Split
				Posted: Fri Jun 09, 2017 1:59 pm
				by jksuperstar
				It's not a great idea to do, since expression pedals usually have power & ground supplied by the device to the pedal.  Using a Y cable puts the two devices' power supplies against each other!   So could cause damage, but will definitely cause noise to ground or supplies.
			 
			
					
				Re: Expression Pedal Split
				Posted: Fri Jun 09, 2017 4:31 pm
				by yayajohn
				ah shucks 
 
didn't know that about the pwr supplies.  Are they battery powered?
I have the Moog EP-3 and I didn't see where a battery was, it just worked out of the box on my pedal device.
I'm confused
@marco it's the 1/4 jack exp pedal not the midi type.
 
			 
			
					
				Re: Expression Pedal Split
				Posted: Fri Jun 09, 2017 4:48 pm
				by dante
				You might be able to do in software with SpaceF CCx2
			 
			
					
				Re: Expression Pedal Split
				Posted: Fri Jun 09, 2017 6:53 pm
				by Marco
				Okay the expression pedal is analog? Should frst be converted into a Midi signal to make it twice with Midi thru. I know my Midi thru box isn't perfect. But in scope your possibilities are endless
			 
			
					
				Re: Expression Pedal Split
				Posted: Sat Jun 10, 2017 4:29 am
				by yayajohn
				ok hmmm that's interesting I will have to look further into how to use this thing.
Right now I have it plugged into a Lester-G stomp box but I found another expression input on another device.  Neither one has midi so it will have to be analog I guess.  I use the Behringer foot pedal for the midi mod stuff.
			 
			
					
				Re: Expression Pedal Split
				Posted: Sat Jun 10, 2017 4:32 am
				by yayajohn
				@Jk;  I just re-read your post and i get it now.  The stomp box sends a pwr signal to the pedal!  That makes sense. 

 
			 
			
					
				Re: Expression Pedal Split
				Posted: Sat Jun 10, 2017 4:52 am
				by Marco
				With this device you can convert it to any CC number! 
http://forums.scopeusers.com/viewtopic.php?f=5&t=34981 
			 
			
					
				Re: Expression Pedal Split
				Posted: Sat Jun 10, 2017 1:29 pm
				by jksuperstar
				yayajohn wrote:@Jk;  I just re-read your post and i get it now.  The stomp box sends a pwr signal to the pedal!  That makes sense. 

 
Exactly.  But, if these are two stomp boxes you are talking about, and they both get their power from the same distribution unit, then it might not be a problem!  I was thinking it would be two keyboards, or something like that.
 
			 
			
					
				Re: Expression Pedal Split
				Posted: Sat Jun 10, 2017 1:56 pm
				by yayajohn
				no i've got them all on separate pwr.  Prob best just to get another pedal then.
Thanks
@marco.  SpaceF CCx series are excellent devices.  They are included with BBII and a buttload of other very cool devices and modules.
			 
			
					
				Re: Expression Pedal Split
				Posted: Mon Jun 12, 2017 6:57 am
				by jksuperstar
				
			 
			
					
				Re: Expression Pedal Split
				Posted: Mon Jun 12, 2017 12:15 pm
				by yayajohn
				That awesome.  Thanks for the link I will ponder that.
			 
			
					
				Re: Expression Pedal Split
				Posted: Tue Jun 13, 2017 9:53 pm
				by jksuperstar
				It's one option I came across, there's probably more out there.
			 
			
					
				Re: Expression Pedal Split
				Posted: Wed Jun 14, 2017 11:18 am
				by yayajohn
				I will look, thanks for the help jk 
