STM1632 Mixer problems, project corruption?
Posted: Wed Apr 13, 2016 7:04 am
I'm having regular difficulties with my projects getting corrupted resulting in strange behavior with the STM1632 mixer. I'm not really sure if the problem resides with the mixer or perhaps with the ADAT inputs getting corrupted.
What happens is when I open the project, certain channels from an ADAT input will not produce sound. For example, I have audio coming in on all 8 channels, however, only 5/6 and 7/8 produce any sound in the mixer. I can remove that particular adat input, and then add it back to the project and after doing so, I will get a single channel from the stereo pair, so now I get inputs 1 3 5/6 7/8.
Additionally, I will get clicks every now and then on channels from this problem adat input with the corrupted project. It is not an issue with the sync or the physical connections, as I can open up a backup project and everything works.
Also, sometimes a channel (in this case the stereo channel connected to inputs 5/6 will show metering, but produce no sound. If I solo that channel and then unsolo it, the sound returns.
These are big projects with a lot of inputs -- 5 x ADAT and 2x Z-link on a 3x Scope Pro system.
Are there known bugs with STM1632? I could switch to another mixer, I use it mostly for a mix of dsp economy/function/familiarity, but I have other options.
Is there a way to avoid projects being corrupted? I'm saving as I go along, but when I open up the project later, somethings gone amiss. This has happened a few times. I'd rather not have to build projects from scratch each time...
What happens is when I open the project, certain channels from an ADAT input will not produce sound. For example, I have audio coming in on all 8 channels, however, only 5/6 and 7/8 produce any sound in the mixer. I can remove that particular adat input, and then add it back to the project and after doing so, I will get a single channel from the stereo pair, so now I get inputs 1 3 5/6 7/8.
Additionally, I will get clicks every now and then on channels from this problem adat input with the corrupted project. It is not an issue with the sync or the physical connections, as I can open up a backup project and everything works.
Also, sometimes a channel (in this case the stereo channel connected to inputs 5/6 will show metering, but produce no sound. If I solo that channel and then unsolo it, the sound returns.
These are big projects with a lot of inputs -- 5 x ADAT and 2x Z-link on a 3x Scope Pro system.
Are there known bugs with STM1632? I could switch to another mixer, I use it mostly for a mix of dsp economy/function/familiarity, but I have other options.
Is there a way to avoid projects being corrupted? I'm saving as I go along, but when I open up the project later, somethings gone amiss. This has happened a few times. I'd rather not have to build projects from scratch each time...