scope xite host card

sunset070 · Post by **sunset070** » Fri Jun 20, 2008 12:06 am

I want known is possibile use for scope xite one host pciE card 16 x
in other word is posiible have how pcie host card one pciE 16 x in my pc?
I have only 16x and 4 x PciE slot in my MB,
wich tipe of host controller pciE have the new xite card?

sorry for my english
thnx in advantage

kylie · Post by **kylie** » Fri Jun 20, 2008 1:06 am

stardust wrote:It hasn't been published yet.
But the PCI-E slots are downward compatible from the specs.
So you can use 4x card in a 8x or 16x slot.

...but most consumer boards are equipped with pcie x16 (one or more) and pcie-x1 only (apart from old pci).

that would mean if they make the card > x1 and you have a gfx card with peg (pcie-x16) you'll need a board with at least 2 peg slots.
if it is a pcie-x1 card (that is my guess, but then, it's just a guess) most boards available currently will fit.
since an express card implies a single lane, and express card is said to be the other type of possible connection for a XITE, the pcie card is likely to be x1, too.

http://www.expresscard.org/web/site/about.jsp

-greetings, markus-

sunset070 · Post by **sunset070** » Fri Jun 20, 2008 10:02 am

I use intel integrate video card and have free 4x and 16x pciE slot,
I can use the 16 x slot for scope xite host card istead the vga card?

Warp69 · Post by **Warp69** » Fri Jun 20, 2008 11:08 am

stardust wrote:Therefore the question if 10 times the DSP power (but with more onboard memeory) can be squeezed through a single lane representing 2 PCI 32 slots ?!

You can easily use all the bandwidth of single lane of PCIe with reverbs.

Shroomz~> · Post by **Shroomz~>** » Fri Jun 20, 2008 11:10 am

Yikes.

Fluxpod · Post by **Fluxpod** » Fri Jun 20, 2008 11:13 am

I second the yikes and may add: I bet on it that it will be a x1 pci-e card that Should be used in a x1 to x4 slot.I dont know if you can use it in a x16 slot but i guess its reserved for gfx only.

hifiboom · Post by **hifiboom** » Fri Jun 20, 2008 5:30 pm

should be downwards compatible...

kylie · Post by **kylie** » Sun Jun 22, 2008 11:22 pm

stardust wrote:my tip x4 and runs also on x1

won't work.
I finally found what I was looking for:

http://www.redbooks.ibm.com/abstracts/tips0456.html

smaller cards in bigger slots are supported, but not the other way round. the cards are just keyed in a way they won't even fit mechanically. see also

http://en.wikipedia.org/wiki/Image:PCIExpress.jpg

a x4 card would have to have another notch to fit into a x1 slot.

-greetings, markus-

Shayne White · Post by **Shayne White** » Tue Jun 24, 2008 7:40 am

Here's an idea: maybe XITE can plug into either a x1 card or a x4 card (if you need more bandwidth). Since we don't know anything about it yet, let's hope that's true.