Page 1 of 1
Suggestions for MOBO/Quad Processor for Scope and UAD
Posted: Wed Feb 06, 2008 8:42 pm
by dynamixii
I have a Scope 4.5 system
((Pulsar II Card and a16 output rack))
and
((UAD PCi card)) I may buy another UAD too so the system will need a min of 4PCi slots I would like more just in case though
Any suggestions?
I want to set up a quad processor and run XP that is 100% compliant with my cards.......
Posted: Thu Feb 07, 2008 1:23 am
by dawman
http://www.attro.com/motherboard/MB898.htm
They have the only 6 PCI slot board I know of w/ the Core 2 Duo quad chipsets.
Posted: Thu Feb 07, 2008 3:44 am
by MD69
Hi,
Supermicro C2SBE (4PCI) and Gygabyte GA P35 S3G (5PCI) both with P35 chipset. Supermicro PDSBE (4PCI) with 965 chipset.
cheers
Posted: Thu Feb 07, 2008 10:53 am
by garyb
yeah, p35 or 965 chipset boards work in general. the gigabyte is available with 5 pci slots. the intel brand boards are cheap and stable.
Posted: Fri Feb 08, 2008 11:23 pm
by siriusbliss
garyb wrote:yeah, p35 or 965 chipset boards work in general. the gigabyte is available with 5 pci slots. the intel brand boards are cheap and stable.
Intel MB is happy here - and I HATE Intel (worked there for 3 years, so I KNOW I hate 'em
)
Greg
Posted: Sat Feb 09, 2008 10:28 am
by siriusbliss
stardust wrote:So it is not the brand for you but the board performance sirius!
Yeah the motherboard is great, but I highly recommend avoiding ANYTHING Intel with re: to wireless or graphics oriented chipsets
Greg
Posted: Sat Feb 09, 2008 12:23 pm
by siriusbliss
stardust wrote:regarding graphics It was clear to me anyway, regarding LAN it did not seem so bad. But ok you spoke of WLAN.
Yeah, Intel is an anagram for evil
Greg
Posted: Sun Feb 24, 2008 10:57 pm
by dynamixii
Thanks!
Posted: Mon Feb 25, 2008 11:52 am
by dynamixii
Any stable vid card recommendations for this mother board>?