Page 1 of 1
Posted: Mon Sep 11, 2006 5:06 am
by arela
Has anybody experienced trouble with s-ata connections?
My DAW is a little over 3 years old.
It has 2 s-ata drives.
The main one (C:) gave me some trouble a couple of years ago, but after i changed the s-ata cable, it has been problem free.
This weekend, my other disk began to drop out.
Changed cable again, and it seems to work.
Any experience/thoughts?
Posted: Mon Sep 11, 2006 7:35 am
by gustav
what kind of trouble ?
i had recently problems of detecting a sata drive because the power supply was not powerful enough
Posted: Mon Sep 11, 2006 11:19 am
by braincell
mine is not tight enough and comes off sometimes.
Posted: Mon Sep 11, 2006 12:17 pm
by ARCADIOS
sata cables have smaller contacts especially voltage plugs.
yesterday i cleaned the pc inside and put some spray for contacts in some electric contacts like scope cards stdm contacts and pci contacts, agp8 as well. i didn't spray on the motherboard. i just put carefully on the cards contacts with some cleanex.
do you think this might make things better?
in fact i am not sure 100% about this method on pc staf. it works for sure on other electronic device.
Posted: Mon Sep 11, 2006 10:36 pm
by arela
First time, when it was c: - it crashed immediately
When it was 2. HD, i just lost connection to it. So i had to restart, after shaking the box and touch tha cables. Sometimes it worked, somtimes not.
The pc has been running 22h without a prob so far, so ....i have hopes
Posted: Tue Sep 26, 2006 2:14 pm
by arela
It has run flawlessly for more than 14 days, so there was a cure, whatever the problem was.
Guess the conectors was exchausted