Page 1 of 1
Posted: Tue Aug 15, 2006 10:57 am
by ARCADIOS
if i raise the voltages from within bios of my abit ic7g, without overclocking, is this going to add stability, and if yes, how much raise should i do and to which components?
Posted: Tue Aug 15, 2006 11:31 am
by astroman
if you ask this question you should completely stay away from it...
but as the most humorous greek ever this will not stop you, that for sure
I have no idea on the topic, as I'd be only interested in the reverse process - keeping temperature down. Any fan noise drives me nuts.
cheers, Tom
Posted: Tue Aug 15, 2006 11:48 am
by alfonso
On 2006-08-15 11:57, ARCADIOS wrote:
if i raise the voltages from within bios of my abit ic7g, without overclocking, is this going to add stability, and if yes, how much raise should i do and to which components?
MH TO KANEIS!!!
seriously,optimal voltages are those for wich the hardware is rated.
Posted: Tue Aug 15, 2006 11:54 am
by ARCADIOS
a guy from abit forum told me that if i raise without overclocking i should do it only for ddr and suggested 2.7 volts dor the ddrs, but he also stated that this might not add stability.
now far from jokes these days in greece are very hot.
stability is a little sh..sh...shaking!!
i am looking for ways to increase it or for a cooling solution but to be honest i don't like watercooling.
meanwhile air doesn't do anything..
i don't know.
i think that dsps are hot.
lets say that i use watercooling.
if i cool down cpu, vga and chipset, this will affect pci slots temperature as well?
i mean is it going to be helpfull for dsps?
_________________
ELVISLIVES
<font size=-1>[ This Message was edited by: ARCADIOS on 2006-08-15 13:04 ]</font>
Posted: Tue Aug 15, 2006 12:36 pm
by garyb
leave it alone.....
Posted: Tue Aug 15, 2006 12:42 pm
by pollux
Hi,
This might be a solution (didn't try myself yet)
http://www.tomshardware.com/2006/01/09/ ... _the_fans/
Cheers!
Raul
Posted: Tue Aug 15, 2006 2:10 pm
by ARCADIOS
http://images.bestbuy.com/BestBuy_US/im ... 201_sa.jpg
best pc case!!!
atx i think, but we should ask for sure.
is this goint to have results on pci pins temperature?
what thermal paste?
_________________
ELVISLIVES
<font size=-1>[ This Message was edited by: ARCADIOS on 2006-08-15 15:11 ]</font>
Posted: Wed Aug 16, 2006 3:45 am
by astroman
it will not work due to moisture
fyi - clock rates are so high meanwile that the rules of current flowing through copper lines don't apply anymore. At least not in every part of a mobo (as it was years ago).
It's about hf waves surface flow (or whatever it's called) - pretty wierd stuff, btw.
one PC in the oil bath and one in the fridge would be the perfect fastfood workstation.
A handful of fried potatoes and an icecream or a coke now and then...
cheers, Tom
