short question:
I have a Behringer Rev2496 unit with optical in/outs.
by the way I love this unit. Its really very good for its price.
Can I use the ADAT on the Pulsar card for connection. Or does this only feature a multichannel config and no stereo In/outs
second question:
is there also an ADAT to 8 digital in/out box available for fully digital signal chain and connection...?
<font size=-1>[ This Message was edited by: hifiboom on 2006-08-09 02:09 ]</font>
<font size=-1>[ This Message was edited by: hifiboom on 2006-08-09 03:07 ]</font>
adat using as optical In/Out?
- hifiboom
- Posts: 2057
- Joined: Thu Aug 03, 2006 4:00 pm
- Location: Germany, Munich
- Contact:
-
tgstgs
- Posts: 526
- Joined: Sun Jan 15, 2006 4:00 pm
it once was possible i did with a fostex HDR long time ago;
but i remember restrictions when on old pulsar1; 'no spdif in common' when i remember right and only 2 channels the same time
8 channels is tdat but very old only second hand i think;
newest is a16 ultra;
but you can use every io with adat spec. interface; +
hope that helps
good vibes from vienna
but i remember restrictions when on old pulsar1; 'no spdif in common' when i remember right and only 2 channels the same time
8 channels is tdat but very old only second hand i think;
newest is a16 ultra;
but you can use every io with adat spec. interface; +
hope that helps
good vibes from vienna
- hifiboom
- Posts: 2057
- Joined: Thu Aug 03, 2006 4:00 pm
- Location: Germany, Munich
- Contact:
thank you for quick response...
okay you think with new Pulsar Scope project cards it should be no problem to use the ADAT as Stereo Optical in/out, right
is A16 one of the cheapest solutions for in/out? any other good ones for a good price?
Thanks for your answers.
<font size=-1>[ This Message was edited by: hifiboom on 2006-08-09 03:08 ]</font>
okay you think with new Pulsar Scope project cards it should be no problem to use the ADAT as Stereo Optical in/out, right
is A16 one of the cheapest solutions for in/out? any other good ones for a good price?
Thanks for your answers.
<font size=-1>[ This Message was edited by: hifiboom on 2006-08-09 03:08 ]</font>
-
tgstgs
- Posts: 526
- Joined: Sun Jan 15, 2006 4:00 pm
it worked once for shure (in v3.0 or 3.1 or so);
never used it since then; try it out;
there is tdat (very old) 8channel and a16 (old) and a16 ultra (new) both 16 channel definitive not cheep but very good;
http://www.thomann.de/de/creamware_a16_ultra.htm
on ebay they sell a16 as a16ultra be careful;
if you have zlink also lunaIO 24/96;
but as said you can use any with adat spec. IO
never used it since then; try it out;
there is tdat (very old) 8channel and a16 (old) and a16 ultra (new) both 16 channel definitive not cheep but very good;
http://www.thomann.de/de/creamware_a16_ultra.htm
on ebay they sell a16 as a16ultra be careful;
if you have zlink also lunaIO 24/96;
but as said you can use any with adat spec. IO
-
Aries
- Posts: 183
- Joined: Sun Aug 22, 2004 4:00 pm
I use Fostex VC-8 which is good and priced between £150-200. Behringer also make a similar a good ADAT unit at a simlar price. Search the web.second question:
is there also an ADAT to 8 digital in/out box available for fully digital signal chain and connection...?
<font size=-1>[ This Message was edited by: Aries on 2006-08-09 03:31 ]</font>
- hifiboom
- Posts: 2057
- Joined: Thu Aug 03, 2006 4:00 pm
- Location: Germany, Munich
- Contact: