Page 1 of 1
Posted: Mon Feb 02, 2004 1:38 pm
by thorkell
I sanyone using external (outboard) effects in XTC mode? When I load the external effects module I can not select any ins or outs. It just says Pad: Plugin Loader. I'm using Nuendo2
<font size=-1>[ This Message was edited by: thorkell on 2004-02-02 13:42 ]</font>
Posted: Tue Feb 03, 2004 5:22 am
by thorkell
Has anyone experience in using external effects (outboard) in XTC?
Posted: Tue Feb 03, 2004 12:29 pm
by garyb
have you modified your xtcproject(or was it xtcpro?) so that you have a path for your external effects yet?
Posted: Tue Feb 03, 2004 1:30 pm
by thorkell
yes I have modified the xtcproject.pro. I can use outboard in the chain, but I thougt you were supposed to be able to insert external effect module as an insert in the audio app., because otherwise it is hard to swich between dry and wet signals! There is something called external effects S and M but they don't seem to work??
Posted: Tue Feb 03, 2004 10:21 pm
by garyb
just route a buss out the adat outs and back in a channel like a real mixer,much easier.....(you should be able to route an insert as well by routing the channel out an adat out..)
Posted: Wed Feb 04, 2004 6:31 am
by thorkell
Yes maby I'm overcomplicating this. I'm going to try a new approach with the Nuendo busses...
Thanks