P4C800-E

Post by **Guest** » Fri Dec 05, 2003 11:52 pm

What is the best way to set it up. anyone has this mobo?

[ This Message was edited by: antar on 2003-12-08 12:21 ]

ChrisWerner · Post by **ChrisWerner** » Sat Dec 06, 2003 5:17 am

Hurray, good to hear that sometimes something works!
<img src="http://www.pepp.de/xpressarchiv/gfx/klo.gif"></img>

eliam · Post by **eliam** » Sat Dec 06, 2003 4:00 pm

Yup! Talk about good news!

[ This Message was edited by: eliam on 2003-12-06 16:01 ]

paulrmartin · Post by **paulrmartin** » Sat Dec 06, 2003 5:23 pm

What? Did you buy some Viagra online?

Nestor · Post by **Nestor** » Sat Dec 06, 2003 5:26 pm

I can't see any message to understand why it worked what... ¿?¿?¿?¿?

Post by **Guest** » Mon Dec 08, 2003 1:51 am

Sorry must have quit earlier.

I was trying to figure out a new pc P4 3.2 Gig with mobo P4C800-E and a new 10K RPM drive.

I got it all set up but still finding a problem with Acid and Vegas.

If I try to select from preferences the CD (LG 52/32/52) my system reboots itself.I spent 2 days trying to figure this one out.

This is not a problem in my other system Athlon 1.8gig

Any one has a idea? Am I missing something?

cheers

Nestor · Post by **Nestor** » Mon Dec 08, 2003 11:23 pm

Have you followed the Creamware advices given in the manual?

Have you cheked you have the latest drives?

What about security?

You need to give us more information...

What about power supply? etc., please, check it out...

Post by **Guest** » Tue Dec 09, 2003 2:32 am

Hi All, after a few formats and reinstallation of winXP. I found out that my software are conflicting with the onboard promise controller, (bare in mind my CW cards are not even installed yet)

I was installing the sequencers first so XTC can work after word.

so I took it step by step.
I installed XP/SP1 first and before I updated any drivers I installed Vegas and acid and Voila they worked fine,
then I updated the video card then the network card etc,,, and finally
I installed the promise controller and all hell broke loose.

then I accessed the bios and disable the controller and the system was functioning just fine,

now I am about to install my CW cards .
just goes to show you, I never suspected the CW cards and knew it was something with windows update or the mainboard and after 3 clean formats I found out it was the promise controller.

cheers

[ This Message was edited by: antar on 2003-12-11 13:02 ]

Nestor · Post by **Nestor** » Tue Dec 09, 2003 1:58 pm

In most cases, it is preferable to install ALL drivers first, and then starging with the rest: programs, samples, etc.