Digital audio Soft > a new development company

ibz01 · Post by **ibz01** » Wed May 17, 2006 6:14 am

There will be mono versions for plugins like POLTEQ, N1084EQ, A550EQ? Or they are only for stereo mixes?
Thank you.
PD. Congratulations for your work.

digitalaudiosoft · Post by **digitalaudiosoft** » Wed May 17, 2006 6:27 am

On 2006-05-17 07:14, ibz01 wrote:
There will be mono versions for plugins like POLTEQ, N1084EQ, A550EQ? Or they are only for stereo mixes?
Thank you.
PD. Congratulations for your work.

hi,

yes for POLTEQ, N1084EQ, A550EQ ,SL9000 and Para4Dyn.

ev

MD69 · Post by **MD69** » Wed May 17, 2006 7:26 am

Thanks a lot!!!

musurgio · Post by **musurgio** » Thu May 18, 2006 5:17 am

Dear designer,
Regarding the SL9000 compressor I found that the threshold is not low enouph to get it pumping, when I try to raise the input to slam the compressor I also get into the reds at input although not hearing any bad distortion...
Regards,
Dimitrios

voidar · Post by **voidar** » Thu May 18, 2006 7:34 am

To get compressors pumping you will need to look at your source audio material.

firubbi · Post by **firubbi** » Thu May 18, 2006 8:21 pm

can anyone tell how to install one of this plugin?
thanks

[ This Message was edited by: firubbi on 2006-05-19 08:03 ]

musurgio · Post by **musurgio** » Fri May 19, 2006 2:53 am

You are wrong here.
I am involved with audio for the last 20 years and I knoow what I meant to say.
I said that the threshold does not go down enouph to make it a useable compressor although it sounds very nice.
Trying to raise the input to have the compressor work hard the input clips.
Regards,
Dimitrios

_________________

[ This Message was edited by: musurgio on 2006-05-19 03:54 ]

digitalaudiosoft · Post by **digitalaudiosoft** » Fri May 19, 2006 3:23 am

On 2006-05-19 03:53, musurgio wrote:
You are wrong here.
I am involved with audio for the last 20 years and I knoow what I meant to say.
I said that the threshold does not go down enouph to make it a useable compressor although it sounds very nice.
Trying to raise the input to have the compressor work hard the input clips.
Regards,
Dimitrios

hi dimitrios,

it is not a problem

you are right,if you work at -16db ,it is not enought for pumping.
I can lower the threshold easily.
I will do it for the bought version.

thanks

ev

_________________
http://www.digitalaudiosoft.com

[ This Message was edited by: digitalaudiosoft on 2006-05-19 04:23 ]

musurgio · Post by **musurgio** » Fri May 19, 2006 4:01 am

Your efforts are much appreciated.

One thing I would love to see made is a GOOD Tape emulator.
You could probably emulate a Studer machine...
If you need beta tester count me in.
Regards,
Dimitrios

voidar · Post by **voidar** » Fri May 19, 2006 4:57 pm

On 2006-05-19 03:53, musurgio wrote:
You are wrong here.
I am involved with audio for the last 20 years and I knoow what I meant to say.
I said that the threshold does not go down enouph to make it a useable compressor although it sounds very nice.
Trying to raise the input to have the compressor work hard the input clips.
Regards,
Dimitrios

_________________

[ This Message was edited by: musurgio on 2006-05-19 03:54 ]

Well, I got it to pump fine, on a allready mastered stereo-file. Maybe I don't understand what you mean by pumping.

In my experience you can easily make any compressor pump by increasing the rhythmic low-end.

[ This Message was edited by: voidar on 2006-05-19 17:58 ]

firubbi · Post by **firubbi** » Sat May 20, 2006 1:34 am

hello digitalaudiosoft,
can you tell how to install one of your plugin.. found a bit complicated.
Thanks

MD69 · Post by **MD69** » Sat May 20, 2006 2:24 am

Hi Firubi,

For SFP:
install the mdl in your SFP device directory.

For XTC:
install the mdl in the sfp/deviceXTC/.../stereo/...
install the dll in your vstplugin/xtc/effects directory

cheers

digitalaudiosoft · Post by **digitalaudiosoft** » Sat May 20, 2006 7:23 am

On 2006-05-12 01:48, erminardi wrote:
Cool, the "insert4XTC" is also interesting too!

now,you can download it for free

ps:i don't know how to put them in "devices section"

ev

_________________

http://www.digitalaudiosoft.com

[ This Message was edited by: digitalaudiosoft on 2006-05-20 08:26 ]

erminardi · Post by **erminardi** » Sat May 20, 2006 7:39 am

Many thanks!

MD69 · Post by **MD69** » Sat May 20, 2006 7:54 am

Hi,

How to post a file
in french

tu vas sous devices et tu ouvre un sujet (free guitar bluesman par exemple) et en bas de la page tu appuie sur Post new file

A+

et merci pour le plug!

kwild · Post by **kwild** » Sat May 20, 2006 8:36 am

I've found that switching the master output from stereo to mono (with my presonus central station connected to my amplifier) i get phase cancellations with all the EV plugs but in particular with the SL 9000 and the sl 9000 master comp.
No other experienced that (BIG) problem?

http://www.kwild.com

digitalaudiosoft · Post by **digitalaudiosoft** » Sun May 21, 2006 1:10 am

On 2006-05-20 09:36, kwild wrote:
I've found that switching the master output from stereo to mono (with my presonus central station connected to my amplifier) i get phase cancellations with all the EV plugs but in particular with the SL 9000 and the sl 9000 master comp.
No other experienced that (BIG) problem?

of course ,all my plug are with phase problem and your system not.

i have made test on all my plug.look at this please and after,do and think what you want ...

pink noise generated by creamware control room on sfp 4.5.

phase off

phase on

ev

_________________

http://www.digitalaudiosoft.com

[ This Message was edited by: digitalaudiosoft on 2006-05-21 02:21 ]

kwild · Post by **kwild** » Sun May 21, 2006 6:28 am

U are right man but i got that phase cancellations with your plugs only.
Putting you s9000 mastering comp (or what tha fuck is called) in my mastering chain (psy q/optimaster/sl9000/timeworks mastercomp hard) when i swith to mono the sound becames horrible.Without your stuff no problems...so i think i can't buy your plugs for the moment...
http://www.kwild.com

djmicron · Post by **djmicron** » Sun May 21, 2006 8:16 am

i've made some test and i've found that the sl9000 works correctly exept when used as insert in the stm1632 mixer where the phase issue appears.

digitalaudiosoft · Post by **digitalaudiosoft** » Sun May 21, 2006 9:19 am

U are right man but i got that phase cancellations with your plugs only.

it's not false kwild, and i think we've found the problem :
it's due to our protection module we use, that we still have modified several times !!!
first all all, it's not a total cancellation and what is more strange it doesn't appear on all plateforms !!!
the protction module seems to react differently in several situations.

We made all of our tests on full non protected versions, and the problem you've found actually exists on protected modules, sometimes ...

we are going on working on this protection module, in order to propose every one something the nearest as possible to the full versions,

thanks again for this remark,
digitalaudiosoft