Digital audio Soft > a new development company

digitalaudiosoft · Post by **digitalaudiosoft** » Sat May 13, 2006 1:43 am

On 2006-05-13 02:13, Bifop wrote:

PS : for real zero latency operation, the mix out has to be connected directly to audio outputs, not asio dest.

the direct monitor is actived.so,you have no latence.idem for insert4xtc of course.

ev

_________________
http://www.digitalaudiosoft.com

[ This Message was edited by: digitalaudiosoft on 2006-05-15 06:46 ]

Bifop · Post by **Bifop** » Sat May 13, 2006 1:57 am

I stand corrected on both points !
Thanks to Digitalaudiosoft then.

No need to connect directly to outputs ? It's even better (and simpler) for the routing.
You guys rock.

Triple X 10² bravos

(Just for curiosity sake, where's the company located ? Paris ?)

erminardi · Post by **erminardi** » Sat May 13, 2006 5:19 am

On 2006-05-13 00:19, sonolive wrote:

A lot of questions about the prices, we will soon define a pricing list and it will be very moderate, with some packs at a very attractive prices,

[ This Message was edited by: sonolive on 2006-05-13 00:36 ]

Yeah, I love the "bundle" price concept!

And the words "very moderate" too...

I've tried the M/S EQ: amazing! The dynamic EQ feature is very interesting.

[edit] I've maybe found a bug in Polteq: when I try to bypass/activate the single bands (with incoming audio signal) the SCOPE 4.5 crash. I don't think that is my system because is stable and fresh installed.
Any feedback about this? Thanks.

[ This Message was edited by: erminardi on 2006-05-13 06:39 ]

cannonball · Post by **cannonball** » Sat May 13, 2006 5:30 am

hi

i have tried the demo and sounds so good
i wait for the prices i hope they are not so expensive
but finally this is some fresh air in scope
environments
thanks!!!!

digitalaudiosoft · Post by **digitalaudiosoft** » Sat May 13, 2006 7:00 am

hi,

i've just finished to upload the new demo of sl9000mastercomp and sl9000.

for the sl9000 graphic bug on xtc mode,it's due to demo version and i don't understand why.it makes me crazy !on full version,there is no bug.
the phase and mono button are unable now.

ev

_________________
http://www.digitalaudiosoft.com

[ This Message was edited by: digitalaudiosoft on 2006-05-15 06:47 ]

digitalaudiosoft · Post by **digitalaudiosoft** » Sat May 13, 2006 7:04 am

On 2006-05-13 06:19, erminardi wrote:

[edit] I've maybe found a bug in Polteq: when I try to bypass/activate the single bands (with incoming audio signal) the SCOPE 4.5 crash. I don't think that is my system because is stable and fresh installed.
Any feedback about this? Thanks.

<

i'm going to test it now.thanks for all.and don't be afraid for prices

ev

erminardi,on my sfp 4.5,i have no bug.i have activate/bypass all the band separatly with or without incoming audio signal.

for the sl9000 graphic bug on xtc mode,all is ok if you take the insert module from creamware.

ev

_________________
http://www.digitalaudiosoft.com

[ This Message was edited by: digitalaudiosoft on 2006-05-15 06:47 ]

nprime · Post by **nprime** » Sat May 13, 2006 9:52 am

A little spelling correction for the website.

It's "Bass" not "Basse"

It's "wah wah" for guitar not "wha wha".

How long until we can buy this stuff? I am particularly interested in the m/s eq.

R

Stige · Post by **Stige** » Sun May 14, 2006 2:35 am

[edit] I've maybe found a bug in Polteq: when I try to bypass/activate the single bands (with incoming audio signal) the SCOPE 4.5 crash. I don't think that is my system because is stable and fresh installed.
Any feedback about this? Thanks.

This happened here too.

Perhaps I should also mention that bypass buttons are not functioning with these devices.

digitalaudiosoft · Post by **digitalaudiosoft** » Sun May 14, 2006 2:54 am

On 2006-05-14 03:35, Stige wrote:
[edit] I've maybe found a bug in Polteq: when I try to bypass/activate the single bands (with incoming audio signal) the SCOPE 4.5 crash. I don't think that is my system because is stable and fresh installed.
Any feedback about this? Thanks.
This happened here too.

Perhaps I should also mention that bypass buttons are not functioning with these devices.

hi,

the bypass is linked with the in button.
can you tell me exactly when your sfp crash ?
does it crash the first time you insert the polteq or after trying all demo ?
is there other demo running with polteq when the crash appears ?

it's very important for me to know because on my sfp ,there is no problem.

ev

_________________
http://www.digitalaudiosoft.com

[ This Message was edited by: digitalaudiosoft on 2006-05-15 06:47 ]

Boris · Post by **Boris** » Sun May 14, 2006 4:02 am

Hi Olive and Ev!
How about the manuals for your plugins?

Stige · Post by **Stige** » Sun May 14, 2006 4:23 am

The crash happened once, after I had alredy tried all demos. It was while switching eq band on/off buttons in poltec. If I recall right, the other device was mastering compressor I had running at the same time.

digitalaudiosoft · Post by **digitalaudiosoft** » Sun May 14, 2006 4:43 am

On 2006-05-14 05:02, Boris wrote:
Hi Olive and Ev!
How about the manuals for your plugins?

hi boris,

we are working on it

ev

_________________
http://www.digitalaudiosoft.com

[ This Message was edited by: digitalaudiosoft on 2006-05-15 06:48 ]

digitalaudiosoft · Post by **digitalaudiosoft** » Sun May 14, 2006 4:51 am

On 2006-05-14 05:23, Stige wrote:
The crash happened once, after I had alredy tried all demos. It was while switching eq band on/off buttons in poltec. If I recall right, the other device was mastering compressor I had running at the same time.

thank you stige

maybe it is due to demo version.i will try to make the same configuration on my sfp.

maybe,the only solution will be to buy the full version

ev

so...

what i have done during 20mn:

on 1632 mixer,insert all demo and sl9000 mastercomp on master;
remove all,insert all again,without sound incoming,i'have touch all "in" from poltec;
i do again with sound and never i have seen this bug.

for information

my pc configuration :

p4 dell 3.2 ghz ,1 giga RAM,mode ACPI enable,windows xp sp2 ,sdk installed,sfp 4.5,pulsar 15dsp,digi 002R and protools 6.9 installed.ilock for protools plugins on usb.no optimisation like i can read on full of forum only swap on hd2.no internet.no firewall,no antivirus.

the polteq has been downloaded 118X on those 2 days.i don't think that this bug is due to polteq.

thanks for all

ev

_________________
http://www.digitalaudiosoft.com

[ This Message was edited by: digitalaudiosoft on 2006-05-15 06:48 ]

MD69 · Post by **MD69** » Sun May 14, 2006 1:36 pm

Hi,

POLTEQ: OK here no crash

Scope 4 with 4.5 Dsp files in XTC mode, XP SP1,

XTC Mixer: Get the "DSP overload ..." when I first load Minimax (standard version).

djmicron · Post by **djmicron** » Sun May 14, 2006 2:09 pm

no crash here too.
Tried on 2 systems:
amd 64 3400, asus k8n, 2 giga ram, 1x pulsar2, 2 x scope srb 15 dsp, tried on sfp 4, 4.5, 3.1

sempron 64 3300, gigabyte k8ns pro,1.5 giga ram, 1x pulsar1, 1x powersampler, tried on sfp 4.5, 3.1.

steffensen · Post by **steffensen** » Sun May 14, 2006 3:03 pm

Tried them all, and had no crashes either.

Is it just me, or does the POLTEQ Cut on the top right, not work properly?
The other Cut controls seem to work fine, but i really dont hear any difference when using the above mentioned. *shrugs*

Cant wait for a price idea on this one, anytime soon?

sonolive · Post by **sonolive** » Mon May 15, 2006 12:49 am

Hello,

After lots of questions about prices, we are still working on the price list !
but here is a sample for a bundle :
A - SL900 + SL9000 Master comp + M/SEQ = 169,00 euros (option RMX60 (verb) + 69,00 euros)

B - All the plugs = 499,00 euros

a+++
Olive

http://www.digitalaudiosoft.com
sonolive@wanadoo.fr

steffensen · Post by **steffensen** » Mon May 15, 2006 1:49 am

And for those only interested in the POLTEQ?

erminardi · Post by **erminardi** » Mon May 15, 2006 3:24 am

If I've well understand the single Plug price seems to be around 69eu and the "3 x bunle" 169eu.

MCCY · Post by **MCCY** » Mon May 15, 2006 4:23 am

Could you add a deesser/dynaEQ with sidechain input?
I'm waiting for a good deesser for so long now...

By the way: Has this question been posted before?

Are new dsp-atoms used for sound of EQs in this devices? Where has been used 'own' atoms, where has been used creamware stuff?
To me it seems the sound is very close to the creamware stuff + adding some 'moving' EQs...

Martin