Page 2 of 2
Posted: Sat Mar 06, 2004 1:55 pm
by garyb
1x30gig=primary master
cdrw=primary slave
2x60gig=secondary master and slave
*edit*
2x120gig=over 200 4 minute songs.......
<font size=-1>[ This Message was edited by: garyb on 2004-03-06 13:56 ]</font>
Posted: Sat Mar 06, 2004 7:15 pm
by AndreD
Hi,
never use cd and hard-disk on the same ide-bus!
that would slow down your hard-disk..
best,
andre
Posted: Sat Mar 06, 2004 10:20 pm
by garyb
that's why i have it the way i do.....
Posted: Sun Mar 07, 2004 11:40 am
by firubbi
Thanks garyb,
so i'm gonna do like yours...
1x40gig=primary master
cdrw=primary slave
1x80gig=secondary master.
Thanks
* Andre Dupke will you tell us your setup.
Posted: Sun Mar 07, 2004 1:28 pm
by AndreD
Hi,
2 Samsung SpinPoint 160 GB (8 MB cache) as primary master and slave.
LG DVD recorder as secodary master master..
(by the way, <b>dvd-ram</b> is realy fast
)
best,
andre
<font size=-1>[ This Message was edited by: Andre Dupke on 2004-03-07 13:28 ]</font>
Posted: Sun Mar 07, 2004 1:30 pm
by AndreD
On 2004-03-07 11:40, firubbi wrote:
Thanks garyb,
so i'm gonna do like yours...
1x40gig=primary master
cdrw=primary slave
1x80gig=secondary master.
Thanks
* Andre Dupke will you tell us your setup.
hhmm, I would use the drives on primary- and the cdrw on secondary..
Posted: Sun Mar 07, 2004 5:03 pm
by garyb
firubbi,why not use bigger drives if space is an issue?
Posted: Mon Mar 08, 2004 1:22 pm
by firubbi
garyb it didn't work!! do i have to change anything from bios to do this kind'a setup?
thanks
Posted: Mon Mar 08, 2004 11:21 pm
by garyb
no,you have to change the jumpers on your devices....
Posted: Thu Mar 18, 2004 11:26 am
by firubbi
garyb,
no jumper=master drive.. i did that but some wired problem arise. can you tell me your jumper setting plz?
thanks
Posted: Thu Mar 18, 2004 12:39 pm
by garyb
different for each drive...you must set jumpers on the cd drive as well....