PlanetZ forums - scopeusers.com

I could write a looong replay to that but then this discussion will go on for ever. So, I thank you all for your attention. I'll check in after some weeks to see if there is any interesting replays or new developments

Anytime, Ok we'll see you later then

Mikael-R wrote: Sun Apr 21, 2019 9:19 am ... a looong replay
... I'll check in after some weeks to see if there is any interesting replays ...

Lots of those here https://www.google.de/search?source=hp& ... dKGF7h9JVY



Bud

Wiki points to an earlier version of replay but unfortunately it too is no longer in pressing

https://en.m.wikipedia.org/wiki/Replay_ ... ash_album)

eeey, live hardware, and upcoming modular I/O's! It's getting somewhere And is that "Julian" julian?
https://www.youtube.com/watch?v=hr0o5LPrL7o

Hopefully Nick will do a full review sometime.

As part of the Adern team with others here, and as someone who spent countless hours over almost 2 decades working with Scope DSP, I am not impartial..

I'll pass for the drama. Just wanted to let you know that if you're in Berlin, you can visit Frank and the MPA team at Superbooth this weekend, and maybe go try for yourself:
https://superbooth.com/en/makeproaudio. ... oaudio-903

Damn, wish I'd seen this before. I was at FEZ with the kids a month or so back. Not very far from where we live.

Yeah ! In eurorack format ! (Don't know if this has been already reported.)
https://www.youtube.com/watch?v=Z-ta1glgbk8
https://www.youtube.com/watch?time_cont ... 3y5B3kd1pk

Not cheep ! But interesting !
I wish we had modular version of minimax with sync I/O like the Prowave modular version. That would be similar to that 295 up to 675€ eurorack module !
Sync I/O's are the best on Scope !

Sorry again if it has already been discussed but apparently, the 'Dinopark' is programmable with Scope SDK ! That means that it's Scope that handles the device.
At the bottom of the page : https://www.makeproaudio.com/dinopark-synth-models/
(Hum... You probably already noticed that... Sorry.)

SDK! Does Frank have a cooperation with sonic core? I mean, for me, it is a great idea to use it in a new Hardware. Keep it alive!

Marco wrote: Sun May 12, 2019 7:32 am SDK! Does Frank have a cooperation with sonic core? I mean, for me, it is a great idea to use it in a new Hardware. Keep it alive!

quote: " requires a 6 or 14/15 DSP SCOPE or Pulsar card from CreamWare"

I guess they mean SDK v4 and not SDK versions being coded by S|C (v5 / v7).



Bud

Does my Sdk 7 Key work with Sdk Version 4?

Marco wrote: Sun May 12, 2019 10:15 am Does my Sdk 7 Key work with Sdk Version 4?

no

djmicron wrote: Tue May 14, 2019 12:26 pm
no

I´m happy to read that.

Holger is busy coding SCOPE 7.1, probably w/ very small amount of manpower,- and now S|C users think about helping MPA increasing range of devices by using SDK 5 or 7 they bought from S|C.
Very sad IMO.

Bud

While I don't disagree, let's keep these forums neutral. It's not hard to contact MPA and inquire directly btw, there's no need to do an end-run.

Bud Weiser wrote: Tue May 14, 2019 4:30 pm

djmicron wrote: Tue May 14, 2019 12:26 pm
no

I´m happy to read that.

Holger is busy coding SCOPE 7.1, probably w/ very small amount of manpower,- and now S|C users think about helping MPA increasing range of devices by using SDK 5 or 7 they bought from S|C.
Very sad IMO.

Bud

Don't know the DinoPark in deep, but as i can read on the web site, the developing tool requires an old second hand scope card, they say it's enough a 6 dsp one, but scope sdk 4 licenses were sold for 14/15 dsp cards only, it's not clear to me if MPA can sell or provide for free sdk 4 licenses to new users, in that case it makes sense what they say about the 6 dsp boards.
At the moment i can only see 3d rendered images of the hardware, so i can only guess that even if you only have sdk 5 or 7, you can still develop devices that will run without any problems on scope 3.1 or 4.5.

So, what happenend to MPA?

menno wrote: Wed Mar 11, 2020 6:12 am So, what happenend to MPA?

see yourself.
https://www.makeproaudio.com/



Bud

menno wrote: Wed Mar 11, 2020 6:12 am So, what happenend to MPA?

There is some video demoing it.

I tried to contact the developer some months ago to obtain information about SDK developing on it, but never got an answer.

https://www.youtube.com/watch?v=22lbAX3SgW4