Dear Shrommz,
Sorry for the many suggestions here but I hope these are the best of all of us !
Could you please also when link is activated then the insert effect become STERO ?!!
So that we could put a stereo effect like limiter across the linken channels.
That would be fnatastic feature !!
Regards,
Dimitrios
VM-1242 .. no longer available
mixer
The db difference is ok if it has to do with headroom but the other suggestions would be great if they could be implemented !
Thanks
Dimitrios
Thanks
Dimitrios
Musurgio, you're suggestions are always welcome. We've been thinking about the issue with the insert slots since we added the stereo link functions & I think we have solution. 
You're right about the input gain parameters, they would be better linked as well.
Keep the feedback coming, you've all been a great help so far.
You're right about the input gain parameters, they would be better linked as well. Keep the feedback coming, you've all been a great help so far.
mixer
Thanks Shroomz,
You and your partneres have been a tremendous supporters for this platform with great plugz for all of us and for FREE !!
Keep up the good work !
Regards,
Dimitrios
You and your partneres have been a tremendous supporters for this platform with great plugz for all of us and for FREE !!
Keep up the good work !
Regards,
Dimitrios
Shroomz
Dear Shroomz,
Is it difficult to make a 8,12,16 (whatever) channel adder like auxmix but with leds ?
Regards,
Dimitrios
Is it difficult to make a 8,12,16 (whatever) channel adder like auxmix but with leds ?
Regards,
Dimitrios
musurgio,
we've got too many other devices to get finished before starting anything else, but to answer your question, more multichannel adders aren't too difficult to make.
hifiboom,
- the aux sends are already set up as 2 pre, 2 post.
- the inserts all work fine here apart from ch1&2 pre inserts being round the wrong way, which will be fixed.
- the aux returns can be fed to the mix or either of the busses via the corresponding buttons above & below the 4 blue capped faders (just like the 12 channels). Make sure you switch the aux's ON dsp by engaging the button located between the aux 1 send levels & aux 1 return EQs. When you hover over that button a pop-up description of the buttons function appears. There is a small bug in the led meters for the returns which we'll fix.
regards,
Shroomz
we've got too many other devices to get finished before starting anything else, but to answer your question, more multichannel adders aren't too difficult to make.
hifiboom,
- the aux sends are already set up as 2 pre, 2 post.
- the inserts all work fine here apart from ch1&2 pre inserts being round the wrong way, which will be fixed.
- the aux returns can be fed to the mix or either of the busses via the corresponding buttons above & below the 4 blue capped faders (just like the 12 channels). Make sure you switch the aux's ON dsp by engaging the button located between the aux 1 send levels & aux 1 return EQs. When you hover over that button a pop-up description of the buttons function appears. There is a small bug in the led meters for the returns which we'll fix.
regards,
Shroomz
Hifiboom, quote from the first page of the thread >>>>
Anyway, yes that's correct regarding the sends. Both pre aux sends are mono (sends 1 & 2) and both post sends are stereo.
Must be old ageShroomz wrote:The buttons at the bottom beneath the faders (with the green text) switch the channels, aux's & busses on & off the mix.hifiboom wrote:I can route to the group busses but the sound is still routed to the main channel ( so it gets doubled/phaser)
Anyway, yes that's correct regarding the sends. Both pre aux sends are mono (sends 1 & 2) and both post sends are stereo.
lol, true, my fault 
.....
ya this sounds goodvoidar wrote:Shroomz:
I've been thinking. Could you do a channel strip based on this mixer? Just the drive, EQ and fader. Mono/stereo version.
Perhaps even a valve compressor further down the line..
Or even expand the EQ to have two sweepable mids.
Of course, only for the channel strip device. That would rule.
Scope, Android, Web, PC Plugins and Sounds:
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
Sounds good to me too, the only issue is that I think MCCYRANO might have mentioned on the forum somewhere that he had a built a nice tube/valve compressor, so we could wait to see if he releases itfaxinadu wrote:ya this sounds goodvoidar wrote:Shroomz:
I've been thinking. Could you do a channel strip based on this mixer? Just the drive, EQ and fader. Mono/stereo version.
Perhaps even a valve compressor further down the line
Or even expand the EQ to have two sweepable mids.
Of course, only for the channel strip device. That would rule.
cheers!!
Shroomz just a question....
if you take out the complete ECC tube stages, how much DSP power will the mixer need?
An untubed version may be a good replacement for the STM16/32 mixer?
if the ECC tubes take much power you could blow it up to a 32 channel untubed mixer...
hehe
This thing has true stereo sends, while the STM only has mono sends...
+ its really handy to have the EQs right there available for usage
if you take out the complete ECC tube stages, how much DSP power will the mixer need?
An untubed version may be a good replacement for the STM16/32 mixer?
if the ECC tubes take much power you could blow it up to a 32 channel untubed mixer...
hehe
This thing has true stereo sends, while the STM only has mono sends...
+ its really handy to have the EQs right there available for usage
Yeah, I think I read that tip he shared in the forum a while back. Sounded somewhat like a proposition. Anyway, he did do a tube EQ too. Can't have enough of anything reallyShroomz wrote: Sounds good to me too, the only issue is that I think MCCYRANO might have mentioned on the forum somewhere that he had a built a nice tube/valve compressor, so we could wait to see if he releases it
cheers!!
.My main point though was just a channel strip from the mixer in its own device.