DSP CW BOARD MIXER - Datool magic strip (demo)
Sir Happy to see that you enjoy it !
>>The best thing is that I can contro EQ with my Doepfer Pocket Dial
of course, that's why i made it that way ... to be fully midi controlled with few controllers ...
In fact , you'll need something like 60 controllers for the 24 main mono strips
The pocket Dial from Doepfer ( 4 banks of 16 encoders = 64 ctrls) is a good midi controller for it ...
as i develop my plug with the same pocket dial, i'm sur ir works ...
but in absolute, it works with any such kind of hardware ...
>>Does it works EQ's? it seems not...
of course man !!! it's a mixer !!!
you have to put them on (upper left side of the eq section
>>How can I have stereo input like the Pulsar Mixers (STM 2448/1632)
no the channels are mono ones ...
but :
i have reached a new stage in this developpement ... and i'm about to upload a brand new beta version of it !!!
- with inserts (4 for each channel + 1 for the direct out)
- with HPF + LPF (from 12 to 60 (!!!) dB/oct)
- with one soft clip (drive + ceiling) for each channel ...
- there are 8 more stereo channels , with 2 inserts for each
- the solo have been improved
- direct out have a 3 choice source point (post gain - post HPF / LPF - pre fader
- full functions for general settings ... vu, pan mode ...
The demo of this beta will be soon oline (next monday or thuesday) it will be a totally full version ... no time protection (mine was not so good and had preturbations ...)
but there will be only ... 8 mono channels and 2 stereo ... 1 stereo aux send ... 1 insert slot by channel (instead of 4) ...
i hope you'll come a bit later for dowloading this demo device ...
ciao
a+++
olive
<font size=-1>[ This Message was edited by: sonolive on 2004-06-26 08:50 ]</font>
>>The best thing is that I can contro EQ with my Doepfer Pocket Dial
of course, that's why i made it that way ... to be fully midi controlled with few controllers ...
In fact , you'll need something like 60 controllers for the 24 main mono strips
The pocket Dial from Doepfer ( 4 banks of 16 encoders = 64 ctrls) is a good midi controller for it ...
as i develop my plug with the same pocket dial, i'm sur ir works ...
but in absolute, it works with any such kind of hardware ...
>>Does it works EQ's? it seems not...
of course man !!! it's a mixer !!!
you have to put them on (upper left side of the eq section
>>How can I have stereo input like the Pulsar Mixers (STM 2448/1632)
no the channels are mono ones ...
but :
i have reached a new stage in this developpement ... and i'm about to upload a brand new beta version of it !!!
- with inserts (4 for each channel + 1 for the direct out)
- with HPF + LPF (from 12 to 60 (!!!) dB/oct)
- with one soft clip (drive + ceiling) for each channel ...
- there are 8 more stereo channels , with 2 inserts for each
- the solo have been improved
- direct out have a 3 choice source point (post gain - post HPF / LPF - pre fader
- full functions for general settings ... vu, pan mode ...
The demo of this beta will be soon oline (next monday or thuesday) it will be a totally full version ... no time protection (mine was not so good and had preturbations ...)
but there will be only ... 8 mono channels and 2 stereo ... 1 stereo aux send ... 1 insert slot by channel (instead of 4) ...
i hope you'll come a bit later for dowloading this demo device ...
ciao
a+++
olive
<font size=-1>[ This Message was edited by: sonolive on 2004-06-26 08:50 ]</font>
-
cannonball
- Posts: 344
- Joined: Wed Sep 26, 2001 4:00 pm
- Location: italia
as i will use it this summer for live applications, :
- mixing concerts with the mixer (4 U) PC + 3 monitors ,
- the same PC as an insert rack (24 strips) in addition with analog mixers ...
i did yersterday my first real mix on it !!!
I am proud to annonce that IT'S SOUNDS ! exactly what i was wishing ... a pure and clear sound with no compromise ... eq equalize, comp compres and gate gae !!!
I made the mix in live situation :
- i d'idn't know the tracks : a friend of mine music maker for karaoke gave me 12 tracks of HEY TOU - Pink Floyd (samples for drums, VSTI and accoustic Gtr with mike)
- i spent only 20 minutes for this mix .
- 1 masterverb pro
- i tried to use exclusively the pocket dial and the pro mix 01 (faders / mute / select) but in fact , it's very pleasant to use both ctrlrs ans mouse ... easy to use and quite instinctive way of mixing.
you can listen it here
http://perso.wanadoo.fr/p.f.records/sonsmp3/heyyou.mp3
of course it's mp3 !!! nothink upon 5 Khz, but it's a good way for diffusion over the net !
- mixing concerts with the mixer (4 U) PC + 3 monitors ,
- the same PC as an insert rack (24 strips) in addition with analog mixers ...
i did yersterday my first real mix on it !!!
I am proud to annonce that IT'S SOUNDS ! exactly what i was wishing ... a pure and clear sound with no compromise ... eq equalize, comp compres and gate gae !!!
I made the mix in live situation :
- i d'idn't know the tracks : a friend of mine music maker for karaoke gave me 12 tracks of HEY TOU - Pink Floyd (samples for drums, VSTI and accoustic Gtr with mike)
- i spent only 20 minutes for this mix .
- 1 masterverb pro
- i tried to use exclusively the pocket dial and the pro mix 01 (faders / mute / select) but in fact , it's very pleasant to use both ctrlrs ans mouse ... easy to use and quite instinctive way of mixing.
you can listen it here
http://perso.wanadoo.fr/p.f.records/sonsmp3/heyyou.mp3
of course it's mp3 !!! nothink upon 5 Khz, but it's a good way for diffusion over the net !
Great Sonolive! 
)
I have Pocket Control (not Pocket Dial as I wrote) but I think is a great way for control every Channel EQ's in your demo Mixer. I will try again, because I like that when you select a Channel you can control the selected eq (like Yamaha/Tascam digital mixer). In the STM2448 it' s no possible, and it's a shame. I'm sorry only that are only mono channel... Thank for yours answers! I'm waiting for your next demo Mixer
Bye
)I have Pocket Control (not Pocket Dial as I wrote) but I think is a great way for control every Channel EQ's in your demo Mixer. I will try again, because I like that when you select a Channel you can control the selected eq (like Yamaha/Tascam digital mixer). In the STM2448 it' s no possible, and it's a shame. I'm sorry only that are only mono channel... Thank for yours answers! I'm waiting for your next demo Mixer
Bye
Here it is ...
http://perso.wanadoo.fr/p.f.records/dig ... emo8ch.dev
The beta 2.01 version demo ...
<img src="http://perso.wanadoo.fr/p.f.records/dig ... age001.jpg">
The user manuals :
- word document : http://perso.wanadoo.fr/p.f.records/dig ... datool.doc
- pdf : http://perso.wanadoo.fr/p.f.records/dig ... datool.pdf
- html : http://perso.wanadoo.fr/p.f.records/dig ... datool.htm
about the demo version :
The demo of this beta is a totally full version ... no time protection (mine was not so good and had preturbations ...)
but there will be only ... 8 mono channels and 2 stereo ... 1 stereo aux send ... 1 insert slot by channel (instead of 4) ...
enjoy,
waiting for reviews ...
ciao
a+++
olive
http://www.sonolive.com
sonolive@wanadoo.fr
<img src="http://perso.wanadoo.fr/p.f.records/dig ... cstrip.jpg">
<font size=-1>[ This Message was edited by: sonolive on 2004-06-27 15:21 ]</font>
http://perso.wanadoo.fr/p.f.records/dig ... emo8ch.dev
The beta 2.01 version demo ...
<img src="http://perso.wanadoo.fr/p.f.records/dig ... age001.jpg">
The user manuals :
- word document : http://perso.wanadoo.fr/p.f.records/dig ... datool.doc
- pdf : http://perso.wanadoo.fr/p.f.records/dig ... datool.pdf
- html : http://perso.wanadoo.fr/p.f.records/dig ... datool.htm
about the demo version :
The demo of this beta is a totally full version ... no time protection (mine was not so good and had preturbations ...)
but there will be only ... 8 mono channels and 2 stereo ... 1 stereo aux send ... 1 insert slot by channel (instead of 4) ...
enjoy,
waiting for reviews ...
ciao
a+++
olive
http://www.sonolive.com
sonolive@wanadoo.fr
<img src="http://perso.wanadoo.fr/p.f.records/dig ... cstrip.jpg">
<font size=-1>[ This Message was edited by: sonolive on 2004-06-27 15:21 ]</font>
It's really a great mixer... good job !
Just one thing more: stereo input channel and could be perfect for my works! ... Sorry if I' m boring you!
I would like to know how it's possible to have a full working one, and if you think to build one for 1024x768 video version.
Waiting for your Reply
Best Regards!
SAnd
!Just one thing more: stereo input channel and could be perfect for my works! ... Sorry if I' m boring you
!I would like to know how it's possible to have a full working one, and if you think to build one for 1024x768 video version.
Waiting for your Reply
Best Regards!
SAnd
hi ,
happy to see that you enjoy it !
"Just one thing more: stereo input channel and could be perfect for my works!"
can't understand what you mean !!!
tere are stereo channels ,8, with 2 insert slot for each ...
but you ^probably mean stereo strips same as mono ones ???
right now i don't think so but in the future why not ?
actually it is not totally finished yet even if it's workable !!! so i prefer to finish it with this base ... i still have to do 8 sub groups, 8 DCA (same as VCA but digital + 6 mono aux send ...
"and if you think to build one for 1024x768 video version. "
sorry but the answer is the same as for stereo strips ... no time right now ...
as it is said for html, best view in 1280 X 1024 + 2 TFT 17 " monitors (lol)
sorry for my english !!! i hope every thing is understandable !!!
a+++
olive
<font size=-1>[ This Message was edited by: sonolive on 2004-06-30 09:46 ]</font>
happy to see that you enjoy it !
"Just one thing more: stereo input channel and could be perfect for my works!"
can't understand what you mean !!!
tere are stereo channels ,8, with 2 insert slot for each ...
but you ^probably mean stereo strips same as mono ones ???
right now i don't think so but in the future why not ?
actually it is not totally finished yet even if it's workable !!! so i prefer to finish it with this base ... i still have to do 8 sub groups, 8 DCA (same as VCA but digital + 6 mono aux send ...
"and if you think to build one for 1024x768 video version. "
sorry but the answer is the same as for stereo strips ... no time right now ...
as it is said for html, best view in 1280 X 1024 + 2 TFT 17 " monitors (lol)
sorry for my english !!! i hope every thing is understandable !!!
a+++
olive
<font size=-1>[ This Message was edited by: sonolive on 2004-06-30 09:46 ]</font>
Don't worry 'bout your English, no prob )
(mine is not so good)!
You' ve done a great, great, job, and I like it because I have got the possibilities to control eq on every channel with Pocket Dial in a way that Creamware Mixers can't, and mouse boring, EQ's are the most important thing to control in real time, in my opinion...
Yes, I mean strip channels, like STM2448 or STM1632.
I work with cubase and every asio is connected to 1 stereo bus. So I don't have to worry 'bout mono or stereo... asio 1-2 to mixer 1-2, asio 3-4 to mixer 3-4, and so on.
How to have (when will possible, of course) a full working version? Do you think one Pulsar II is enought, or will I need another DSP card (Scope) for working with your great Mixer??
Great Job, really!
Best Regards
SAnd
)(mine is not so good
)!You' ve done a great, great, job, and I like it because I have got the possibilities to control eq on every channel with Pocket Dial in a way that Creamware Mixers can't, and mouse boring, EQ's are the most important thing to control in real time, in my opinion...
Yes, I mean strip channels, like STM2448 or STM1632.
I work with cubase and every asio is connected to 1 stereo bus. So I don't have to worry 'bout mono or stereo... asio 1-2 to mixer 1-2, asio 3-4 to mixer 3-4, and so on.
How to have (when will possible, of course) a full working version? Do you think one Pulsar II is enought, or will I need another DSP card (Scope) for working with your great Mixer??
Great Job, really!
Best Regards
SAnd