Problem with Pusar and Cubase

[sandrob]

After 4-5 years, I finally changed all the capacitors on the Pulsar 2 card and installed it in the computer. Media Player works normally, but with Cubase I have an ERROR - ASIO drivers cannot be loaded.
Does anyone know what the problem is?

[nebelfuerst]

Which versions of scope, windows or cubase do you use ?

[Spielraum]

Does anyone know what the problem is?

from win10, you need scope7

[garyb]

for Cubase, i would use either an ASIO2 source or an ASIO2 flt source and an ASIO2 dest.

[sandrob]

Which versions of scope, windows or cubase do you use ?

Scope v5.2709, Windows 10 and Cubase 13

[sandrob]

Does anyone know what the problem is?

from win10, you need scope7

Are you sure?
Version 5 worked fine for me with windows 10 before I changed the capacitors. Probably there was some error that I don't know how to solve.

[sandrob]

for Cubase, i would use either an ASIO2 source or an ASIO2 flt source and an ASIO2 dest.

I tried both combinations. Here I have attached a picture of the project that worked normally for me before the capacitors on the card were changed.
It seems that there was a hardware error... The only thing I don't understand is why multimedia drivers work and ASIO doesn't.

[fidox]

Scope platform works just nice with, I have :
Windows 10 64bit - Scope 7 - Cubase 13 Artist
Windows 11 64bit (also worked with Windows 10) - Scope 5 - Cubase Elements 12

Just remembered, since I had some problems running Cubase Elements 12-Scope 5 (ASIO was not recognized) ,try this :

[sandrob]

Scope platform works just nice with, I have :
Windows 10 64bit - Scope 7 - Cubase 13 Artist
Windows 11 64bit (also worked with Windows 10) - Scope 5 - Cubase Elements 12

Just remembered, since I had some problems running Cubase Elements 12-Scope 5 (ASIO was not recognized) ,try this :

Thanks! I'll try.

[fidox]

This was my original post, then at the end of post I figured out the solution for me
viewtopic.php?t=37359

[sandrob]

This was my original post, then at the end of post I figured out the solution for me
viewtopic.php?t=37359

I'm using RME now and I'm at the stage where it's difficult for me to install and try Pulsar, but when I'm able I'll let you know the result.

thanks

[valis]

Scope via ADAT into RME has been my usage since 2003

[sandrob]

Scope via ADAT into RME has been my usage since 2003

Smart combination!
Unfortunately, my slots are full and there are no more places.

[valis]

I use two machines!

The Scope PC can be whatever it needs to be. Both my PCI based system and my Xite (PCIe) are running 2015/16 era workstation boards with 4 core Xeon chips, and have zero issues aside from the few documented concerns with Scope 7 on 64bit.

The downside is heat, but I have way more machines in here than just those two anyway, and the Scope boxes run so cool and stable I barely notice they're there.

[sandrob]

I use two machines!

The Scope PC can be whatever it needs to be. Both my PCI based system and my Xite (PCIe) are running 2015/16 era workstation boards with 4 core Xeon chips, and have zero issues aside from the few documented concerns with Scope 7 on 64bit.

The downside is heat, but I have way more machines in here than just those two anyway, and the Scope boxes run so cool and stable I barely notice they're there.

Aha! I understand
Thanks for info