
PM issues
PM issues
I'm having issues most of the time with sending PMs. I get to a white page, when I submit, but the messages are not in my outbox. I get the issue, if I try to send a message directly from a thread, or if I try to reply. I've also gotten it, when I tried to copy the contend from a thread as text and then send my PM. I only succeded when I wrote a short simple message. I hope the description might help with the bugfixing 

Information for new readers: A forum member named Braincell is known for spreading lies and malicious information without even knowing the basics of, what he is talking about. If noone responds to him, it is because he is ignored.
Re: PM issues
I have this problem as well !
Re: PM issues
I've the problem too.
I found that I can send messages if they contain only ascii characters.
Fede
I found that I can send messages if they contain only ascii characters.
Fede
- John Cooper
- Moderator
- Posts: 1182
- Joined: Thu Mar 22, 2001 4:00 pm
- Location: Planet Z
- Contact:
Re: PM issues
Guys,
I haven't seen this before.
What browser are you using?
And can you give me a specific example. Immanuel mentioned copy/pasting thread content to make it fail. Please give me a specific example.
I just tried copy/pasting Immanuel's post here into a PM to immanuel, and it sent off ok. I'm using google chrome 0.2.149.30
-John
I haven't seen this before.
What browser are you using?
And can you give me a specific example. Immanuel mentioned copy/pasting thread content to make it fail. Please give me a specific example.
I just tried copy/pasting Immanuel's post here into a PM to immanuel, and it sent off ok. I'm using google chrome 0.2.149.30
-John
- John Cooper
- Moderator
- Posts: 1182
- Joined: Thu Mar 22, 2001 4:00 pm
- Location: Planet Z
- Contact:
Re: PM issues
just tried again using IE 7.0.6001.18000. Hate it! But it worked fine.
please try to set up a specific recipe for me so i can try to reproduce it to figure it out.
-John
please try to set up a specific recipe for me so i can try to reproduce it to figure it out.
-John
Re: PM issues
I tried to PM-respond to the initial post in this thread http://www.planetz.com/forums/viewtopic.php?f=8&t=26270 also, I tried c/p-ing the contend, but it failed likewice.
Information for new readers: A forum member named Braincell is known for spreading lies and malicious information without even knowing the basics of, what he is talking about. If noone responds to him, it is because he is ignored.
- John Cooper
- Moderator
- Posts: 1182
- Joined: Thu Mar 22, 2001 4:00 pm
- Location: Planet Z
- Contact:
Re: PM issues
Cool, that's the recipe i was looking for. Failed for me too.Immanuel wrote:I tried to PM-respond to the initial post in this thread http://www.planetz.com/forums/viewtopic.php?f=8&t=26270 also, I tried c/p-ing the contend, but it failed likewice.
Now WTF do I do about it ?

-John
Re: PM issues
I had several issues pm'ing somebody when pressing the button in a thread copied stuff into the message window like quoting does. I think I tried that in the purchase thread where kwild offers some plugins.
nevertheless I was able to send a pm to stardust recently via the same procedure, but afair I deleted everything that was pre-filled in and started the message from scratch...
-greetings, markus-
nevertheless I was able to send a pm to stardust recently via the same procedure, but afair I deleted everything that was pre-filled in and started the message from scratch...
um, start trying with re-enabling ranking. if it doesn't help, well, it was a try anyway...John Cooper wrote:Now WTF do I do about it ?

-greetings, markus-
--
I'm sorry, but my karma just ran over your dogma.
I'm sorry, but my karma just ran over your dogma.
Re: PM issues
Yeah, they must be intrinsically linked.kylie wrote:um, start trying with re-enabling ranking. if it doesn't help, well, it was a try anyway...John Cooper wrote:Now WTF do I do about it ?![]()
-greetings, markus-

Mark
Re: PM issues
surely there are lots of better suggestions what to do. but mine was firstShroomz~> wrote:Yeah, they must be intrinsically linked.kylie wrote:um, start trying with re-enabling ranking. if it doesn't help, well, it was a try anyway...John Cooper wrote:Now WTF do I do about it ?![]()
-greetings, markus-![]()

without a clue of what's broken you can't rule out anything at this point...

--
I'm sorry, but my karma just ran over your dogma.
I'm sorry, but my karma just ran over your dogma.
- John Cooper
- Moderator
- Posts: 1182
- Joined: Thu Mar 22, 2001 4:00 pm
- Location: Planet Z
- Contact:
Re: PM issues
Haha, ya think? I just tweaked your profile rank. We'll see if that fixes the PM issueskylie wrote: surely there are lots of better suggestions what to do. but mine was first
without a clue of what's broken you can't rule out anything at this point...

-John
Re: PM issues
if you sort the memberlist by rank now, I'm on top of the list. well, that's a start. I was afraid you could rank me much worse than you actually did.John Cooper wrote:Haha, ya think? I just tweaked your profile rank. We'll see if that fixes the PM issueskylie wrote: surely there are lots of better suggestions what to do. but mine was first
without a clue of what's broken you can't rule out anything at this point...
ha, now I have to renew my donation for being awarded the Rank-O-Phile grade...

(and sweeten the search for the reason of the PM issue a bit...)
--
I'm sorry, but my karma just ran over your dogma.
I'm sorry, but my karma just ran over your dogma.
Re: PM issues
Rank-O-Phile sounds a lot better than Rank Pervert. 

Re: PM issues
that's kinda exactly what I was trying to express...Shroomz~> wrote:Rank-O-Phile sounds a lot better than Rank Pervert.

btw, john, I tried to send you some PM the same way I remember to see them fail. unfortunately they were sent properly this time, it seems

Last edited by kylie on Wed Oct 29, 2008 1:32 pm, edited 1 time in total.
--
I'm sorry, but my karma just ran over your dogma.
I'm sorry, but my karma just ran over your dogma.
- John Cooper
- Moderator
- Posts: 1182
- Joined: Thu Mar 22, 2001 4:00 pm
- Location: Planet Z
- Contact:
Re: PM issues
hahaha, well kylie, your special rank is only temporary... 

Re: PM issues
btw, john, is that still kagi you use?
--
I'm sorry, but my karma just ran over your dogma.
I'm sorry, but my karma just ran over your dogma.
Re: PM issues
ok, so what did you do, exactly? I tried, and it seems it worked.Immanuel wrote:I tried to PM-respond to the initial post in this thread http://www.planetz.com/forums/viewtopic.php?f=8&t=26270 also, I tried c/p-ing the contend, but it failed likewice.
here's what I did: I pressed pm, then removed the link referring to the post on top and cut some of bills text, but still quoted some lines and added my text.
since I have a rank now, I wonder why it works better than before...

ah, and I use firefox 2.0.0.17 with some addons, including noscript with planetz whitelisted.
--
I'm sorry, but my karma just ran over your dogma.
I'm sorry, but my karma just ran over your dogma.
- John Cooper
- Moderator
- Posts: 1182
- Joined: Thu Mar 22, 2001 4:00 pm
- Location: Planet Z
- Contact:
Re: PM issues
I just went to that topic, selected all bill's text, copied it, opened a new PM, and pasted it in.
Failed to send.
Yes, still using kagi for donations. Not perfect, but not terrible.
-john
Failed to send.
Yes, still using kagi for donations. Not perfect, but not terrible.
-john
Re: PM issues
went fine over here. I did some editing. put some smiley in.John Cooper wrote:I just went to that topic, selected all bill's text, copied it, opened a new PM, and pasted it in.
Failed to send.
I even test-pm'ed bill from that particular post yesterday. all fine.
what else shall I try?
it's fine for me since you can use paypal now to pay at kagi. worked, tooYes, still using kagi for donations. Not perfect, but not terrible.

-greetings, markus-
--
I'm sorry, but my karma just ran over your dogma.
I'm sorry, but my karma just ran over your dogma.
- John Cooper
- Moderator
- Posts: 1182
- Joined: Thu Mar 22, 2001 4:00 pm
- Location: Planet Z
- Contact:
Re: PM issues
I just updated the board to phpBB 3.0.2 (from 3.0.1)
Tried a PM with Bill's message and it seemed to work this time. Please let me know if you see any difference.
-John
Tried a PM with Bill's message and it seemed to work this time. Please let me know if you see any difference.
-John