would you buy this ?
keep em coming
Cerberus was appropriate, or even Orpheus (who killed cerberus).
Solar was appropriate (because of the satellites, like solar system) but already is taken (re: solaris). "Planetary" is not bad in the cosmic field. In the fierce and powerful area, i must say that i quite like "Dictator" , but still prefer multi-synth.
So you guys really like the "beast" ?
Multi-Synth Must Be It's Name.
But it is a Beast of a synth 4 sure.
Wait a minute 4....hmmm,.........4?
But it is a Beast of a synth 4 sure.
Wait a minute 4....hmmm,.........4?
Last edited by dawman on Sun Jan 20, 2008 9:03 am, edited 1 time in total.
>> final specifications
demo soon
demo soon
FUCKIN' A !!!!
The question should be.......Will you sell this?
I have money burning a hole in my pocket..............where would you like it sent.
Send me a key in advance so I don't have to wait for Ralf.
Multi-Synth, SE-1X, and B2003 will get their own MIDI Source Module and keyboard.
VSTi's will have their own.
Let's Get It On !!!!
This is a serious Beast well worth the wait !!
Great Work Mehdi .
The question should be.......Will you sell this?
I have money burning a hole in my pocket..............where would you like it sent.
Send me a key in advance so I don't have to wait for Ralf.
Multi-Synth, SE-1X, and B2003 will get their own MIDI Source Module and keyboard.
VSTi's will have their own.
Let's Get It On !!!!
This is a serious Beast well worth the wait !!
Great Work Mehdi .
Thank You Brotha' Man Mehdi !!!
Now go and check yours $$$$$.
Mehdi,
The inputs numbered 1 - 4 are true audio inputs I assume.
I was wondering if I could route my hardware analog into this and process it w/ Multi-Synth?
I have grown accustomed to using ProOne w/ it's authentic filters and using BP, etc. w/ the hardware analog for a FAT BASTARD sound.
I would love to be able to process those 2 synths inside of Multi.
Tell me this could work.
I will use the 3 Bus and mixL / mixR outs for a total of 8 mono outs. You know they will go to the 8 mono inputs of the FB5.
Are the AUX's stereo like all of your other stuff?
Now go and check yours $$$$$.
Mehdi,
The inputs numbered 1 - 4 are true audio inputs I assume.
I was wondering if I could route my hardware analog into this and process it w/ Multi-Synth?
I have grown accustomed to using ProOne w/ it's authentic filters and using BP, etc. w/ the hardware analog for a FAT BASTARD sound.
I would love to be able to process those 2 synths inside of Multi.
Tell me this could work.
I will use the 3 Bus and mixL / mixR outs for a total of 8 mono outs. You know they will go to the 8 mono inputs of the FB5.
Are the AUX's stereo like all of your other stuff?
I am ready for this.
I await it feverishly. Even with more fervour than I have while checking the mailbox for my tax returns.
I already have a project waiting.
Dual MIDI Source Modules, one for synths and the B2003, one for 16 MIDI channel operation of all VSTi's.
My SE-1X and the ProOne's mono outs will be fed onto the Multi-Synths inputs, where the 4 x pairs of outs will get the 8 mono inputs of the FB5. Sweet !!
One giant synth that will use multiple MIDI channels. The KS88 will be up to the task of adding all of it's controllers, along w. the FP8 and it's pedals, and the Kurzweil Ribbon as well.
Sorry if I seem a trifle excited, but members here have caused this sickness I face daily.
I await it feverishly. Even with more fervour than I have while checking the mailbox for my tax returns.
I already have a project waiting.
Dual MIDI Source Modules, one for synths and the B2003, one for 16 MIDI channel operation of all VSTi's.
My SE-1X and the ProOne's mono outs will be fed onto the Multi-Synths inputs, where the 4 x pairs of outs will get the 8 mono inputs of the FB5. Sweet !!
One giant synth that will use multiple MIDI channels. The KS88 will be up to the task of adding all of it's controllers, along w. the FP8 and it's pedals, and the Kurzweil Ribbon as well.
Sorry if I seem a trifle excited, but members here have caused this sickness I face daily.
Hello Jimmy,
1/2/3/4 are audio inputs that go directly to the 4 channels mixer (4 mono). Channels 1 and 2 are the only one that have their own VCA. Channel 3/4 don't have VCA. All Channels can be send to aux effects (post only), or to the synths themselves.
I currently wonder if i should put some Aux Returns for effects... because i like the cube so far (returns=6 more inputs on the left side of MS...). But adding external aux returns is possible.
All aux/busses are stereo. You can use the filters/mono inserts for mono effects (in any of the slots. you can put a mono delay as the first filter if you want).
so... don't shoot the dog (it looks like someone i know...).
1/2/3/4 are audio inputs that go directly to the 4 channels mixer (4 mono). Channels 1 and 2 are the only one that have their own VCA. Channel 3/4 don't have VCA. All Channels can be send to aux effects (post only), or to the synths themselves.
I currently wonder if i should put some Aux Returns for effects... because i like the cube so far (returns=6 more inputs on the left side of MS...). But adding external aux returns is possible.
All aux/busses are stereo. You can use the filters/mono inserts for mono effects (in any of the slots. you can put a mono delay as the first filter if you want).
so... don't shoot the dog (it looks like someone i know...).
O.K.,
I shall spare it's life, even though it doesn't hunt.
Multi-Synth doesn't seem to hurt my DSP's much.
You will not hear from me for a few days........................
SE-1X , and ProOne will send their audio into the Multi.
The B2003 bypasses the FB5 and goes into a stock Channel where DAS DynaPara, and EchoReQ 2 are used. Then to the A16U and outputted to the Rotary cabinet.
I have your BBII delays and mono effects. Your fantastic Wah-Wah, your FAT BASTARD Mixer, and now your synth.
Damn w/ Celmo and DAS, this is practically a DAW made in France.
Screw the headphones, I have to create a project with my live rig. I have the house to myself for at least 2 weeks.... Boy Oh Boy !!
I shall spare it's life, even though it doesn't hunt.
Multi-Synth doesn't seem to hurt my DSP's much.
You will not hear from me for a few days........................
SE-1X , and ProOne will send their audio into the Multi.
The B2003 bypasses the FB5 and goes into a stock Channel where DAS DynaPara, and EchoReQ 2 are used. Then to the A16U and outputted to the Rotary cabinet.
I have your BBII delays and mono effects. Your fantastic Wah-Wah, your FAT BASTARD Mixer, and now your synth.
Damn w/ Celmo and DAS, this is practically a DAW made in France.
Screw the headphones, I have to create a project with my live rig. I have the house to myself for at least 2 weeks....
Boy Oh Boy !!scope4live wrote:O.K.,
Damn w/ Celmo and DAS, this is practically a DAW made in France.
Screw the headphones, I have to create a project with my live rig. I have the house to myself for at least 2 weeks....
Very nice to hear
But i can't stop myself reminding that the French could not have gone very far without the Germans
Mehdi,...My Brotha',
Can you send me a project where you have attched satellites and stuff to play with please.
I have loaded many different Oscillators from your vast collection, and I will be tweaking for days with just those.
It accepts the Flexor stuff too. This is a very deep synth.
High resonances @ 36db Filters is FAT w/ Saturation.
My hardware analog SE-1X loves the audio inputs.
This is definately not a one-trick Pony.
Excellent Job, I hardly Know Where To Start.
Can you send me a project where you have attched satellites and stuff to play with please.
I have loaded many different Oscillators from your vast collection, and I will be tweaking for days with just those.
It accepts the Flexor stuff too. This is a very deep synth.
High resonances @ 36db Filters is FAT w/ Saturation.
My hardware analog SE-1X loves the audio inputs.
This is definately not a one-trick Pony.
Excellent Job, I hardly Know Where To Start.
I don't know if anyone else is messing with this synth in it's BETA form, but it is amazing what Mehdi has done.
I am fumbling like a fool as it is very deep, but after a brief bit of help from SpaceF I have heard some of it's power on a 4 voice synth and can say I have nothing like this in my arsenal.
I am trying to use it as my monophonic synth, and using the other 2 synths for layering, splitting, and even 2 separate synths for bouncing back and forth via MIDI channels.
Having the SE-1X in it's inputs and mixing it with a monophonic instance inside of Multi-Synth is what I am doing ATM and the possibilities are astounding.
This is a serious beast.
I am fumbling like a fool as it is very deep, but after a brief bit of help from SpaceF I have heard some of it's power on a 4 voice synth and can say I have nothing like this in my arsenal.
I am trying to use it as my monophonic synth, and using the other 2 synths for layering, splitting, and even 2 separate synths for bouncing back and forth via MIDI channels.
Having the SE-1X in it's inputs and mixing it with a monophonic instance inside of Multi-Synth is what I am doing ATM and the possibilities are astounding.
This is a serious beast.