No ASIO Driver Problem ?

arish · Post by **arish** » Sun Dec 30, 2001 5:49 pm

Hi all I Got into a big mess here.
Cubase can't Recognize the 'ASIO driver' !
I Can see there only the 'asio Multimedia Driver'
When i swich to Asio Driver , I get the message 'No Asio Driver'
Then Crashes! -- no SYNC to Pulsar, only Internal,in the Audio Clock Source.
It Does Not pass the BufferSize Test As well,---" sorry,communication with the audio card has been lost"
Anything on mind to get me out of this MESS !@
Regards
Arish

Spirit · Post by **Spirit** » Sun Dec 30, 2001 6:32 pm

Have you followed the instructions in the CW manual ? I'm no VST expert, but I just followed the steps and it all worked perfectly (at least for midi). The basics include starting Pulsar first, then making sure you select ASIO Scope in the Options > Audio setup > System menu item in VST.

I'm sure VST veterans can offer more details...

arish · Post by **arish** » Sun Dec 30, 2001 6:45 pm

The Moment i open Cubase--
I recive ' No asio driver'
Then when i open the Audio setup Only The asioMultimedia Driver is there(or nothing )
And can't be change other wise to ScopeASio Driver.
Anyidea ?

Spirit · Post by **Spirit** » Sun Dec 30, 2001 6:54 pm

Have you got your Pulsar project set up with the ASIO Source and Destination modules ?

arish · Post by **arish** » Sun Dec 30, 2001 7:00 pm

Shure.
It was working well.. till now
And some how it happened

at0m · Post by **at0m** » Sun Dec 30, 2001 9:33 pm

1) How's your Samplerate sync? Pulsar must be locked (master or as slave) to a frequency.
2)Try loading another ASIO driver set in your project, like ASIO1 instead of ASIO2.

topbanana · Post by **topbanana** » Mon Dec 31, 2001 9:45 am

This is just one of the problems I am having when Pulsar clock source goes spdif for no apparant reason. No matter what I set the software sample rate to be Pulsar always seemed to insist that there was an spdif word clock source even though nothing was plugged in it. This totaly threw the ASIO drivers sending the card into a fit of confusion. Especially within Cubase 5.X.

Have a look at this thread. It may help, particulaly the last bits.

Good luck & a Happy new year.
TB

http://www.planetz.com/forums/viewtopic ... forum=1&14

<font size=-1>[ This Message was edited by: topbanana on 2001-12-31 09:46 ]</font>

sandrob · Post by **sandrob** » Mon Dec 31, 2001 3:57 pm

1. deinstal cubase
2. go to http://www.jv16.org/ and download regcleaner.
3. with regcleaner delete all asio stufs
4. instal cubase again
5. if don't work reinstal pulsar

hope this will help?!

sandro

arish · Post by **arish** » Mon Dec 31, 2001 4:43 pm

Thanks,
Before i will try your advices and links ,i will add Tha i keep getting from Pulsar The message that--'The connections with the STDM Cable is bad btween the two cards' - i have P1+PS.
AND THE SampleRate is keep jumping - like disconcting with out stop !
I will try to reinstall Cubase now

Arish

arish · Post by **arish** » Mon Dec 31, 2001 4:53 pm

I will add that i had every thing going well
And..... it happend
I have pulsar1 a year and a half

Arish

arish · Post by **arish** » Mon Dec 31, 2001 7:41 pm

took out cubase and reinstall ...and the problem remains
I reinstall Pulsarv3(did not take it out)..and the problem remains.!
But i keep getting the massage from Pulsar
"Missing STDM Connection- Pulsar(ID1)does not seems to haveSTDM conection to the other boards please check the ..."
Can be any connection to that problem?
And waht to do with this STDM thing?
Still when i open Cubase- i recive- "the AsioDriver could not be loaded"

Arish

arish · Post by **arish** » Tue Jan 01, 2002 4:49 pm

HALLELUYA...
I took Pulsar1 out of it's Slot Clean it with Alcohol and...
every thing is working again !
Allproblem disappear,asio is working again with Pulsar!

But i hAve the feeling that there is some connection to this problem with HIT.
Cos the problems were coming only after the Computer was working/on awaile.

Do enebody here use 2 Fans in the system?
How is it going?
I am thinking to buy another FAN .

thanks for all the tips

arish

Spirit · Post by **Spirit** » Tue Jan 01, 2002 5:12 pm

Congratulations ! It's a great feeling when a problem is finally solved. of course in your case you might have solved it earlier using the proven "quick fix method for all machines" - this is: give the damn thing a good thump.

topbanana · Post by **topbanana** » Wed Jan 02, 2002 4:56 am

Hmmmm,

I think I might take my card out and give it a clean. Giving it a shove seemed to dramatically reduce the ASIO problems I have.

TB

Spirit · Post by **Spirit** » Wed Jan 02, 2002 5:08 am

Ah yes, solution number 2 to all technical problems: alcohol

topbanana · Post by **topbanana** » Wed Jan 02, 2002 9:02 am

Ohhhhhhhhh yehhhhhhhssssssssss.

TB

arish · Post by **arish** » Wed Jan 02, 2002 11:42 am

Ye,
i feel like in the first time agian
And what a bout A nother FaN?

arish · Post by **arish** » Wed Jan 02, 2002 1:27 pm

I guess the DEVIL read This Post!
10min' After i post this massage the hole problem came back again !@!

so, i went with my feeling..
and opened the The fan box..
It was fulll of DUST,so, i blow a little
Clean(with alcohol ofcourse),put it back.
- now its working back again(i should wait and see for awhile)

but my only problem is that i don't remember
How do i put back the fun, pacing with the label out or inwardly(blowing against the power slot)??
any body with fan experience?

Arish

Micha · Post by **Micha** » Thu Jan 03, 2002 3:07 am

out. The warm air inside must be thrown out. That's the rule. Fans are usually labeled at the side that is visible from outside. So you can read the label if the holes are plenty or big enough.
Try and if the air blows out you've made it.
Happy pulsaring
Micha

Post by **garyb** » Thu Jan 03, 2002 10:54 pm

more cooling is always better.(unless it's so loud that it drowns out the music)