Sonic Timeworks : Classic Plate released

pling · Post by **pling** » Wed Jan 12, 2005 8:19 am

sorry, i left out something

[ This Message was edited by: pecora on 2005-01-12 19:47 ]

astroman · Post by **astroman** » Wed Jan 12, 2005 8:27 am

On 2005-01-12 06:48, dubcotics wrote:
... This is craig last quote : "Have you entered the number: 4EDT0H5888YYO Have into the registration window????
...

This is Astroman's quote here : "the 'serial' you received is automatically generated by the shop system for customers of native plugins.
The type of 'number' already shows that this can never be a SFP key, much too short"

So why on earth is Craig asking me to enter the serial key into the resgistration window then!
...

I referred to the serial that comes immediately with with online purchase confirmation, something like an 8 figure numeric value.
the pattern in your example DOES look like a 'real' one, so Craig isn't talking nonsense.

the only clue for me is that something got messed in context of multiple boards with registered devices.

did you repeat the process with one specific board choosen to generate the request string and then entering the received key for exactly that board ?

cheers, Tom

dubcotics · Post by **dubcotics** » Wed Jan 12, 2005 12:21 pm

hi,

I did what was supposed to be done, that's why I've come, I've tried all the possible combination to make it work but in vain, cheers.

ps: this is Craig's last quote, "btw, are you using xtc mode?

The Classic Plate P-100 is usable in XTC mode. Not as a standalone
device, but in combination with the XTC rack module. With this module
you can almost use any non XTC devices in XTC mode. I think the rack
module has 4 insert slots, which you can load with any devices without
introducing additional latency. This is probably the only way to use
the Classic Plate P-100 (and future products, like Ambience and
Inverse) in XTC mode."

I suppose that it wont work as I've never used XTC, well I'm lying, I mean not on a regular basis, I've tried it just by curiosity, but I don't see the advantages of it.

King of Snake · Post by **King of Snake** » Wed Jan 12, 2005 2:38 pm

I think he's just saying how to use it in XTC mode, not that it only works in XTC...

dubcotics · Post by **dubcotics** » Wed Jan 12, 2005 3:10 pm

hi,

just got a feed back from Craig stating that I would be refunded, it's a shame because ?i've mailed him sevaral times for some troubleshooting. I was really excited about everybody statement concerning the device. Well cheers and you all for your feedback.

ps: Craig never thought I was using XTC, as I never mentioned any XTC problems, The problem was and is with the registry, bad luck I guess, plus I think a manual or something similar shoulda been sent, so that one's can get along with, but that was not the case here, again thanks.

thomashenrydavies · Post by **thomashenrydavies** » Thu Jan 13, 2005 5:12 am

I'm sure it does work in XTC mode, without the need for the FX rack thingy. I've got the demo versions of both of Warp69s reverbs, and they work well in XTC mode simply using the dummy dll technique.

astroman · Post by **astroman** » Thu Jan 13, 2005 6:52 am

On 2005-01-12 15:10, dubcotics wrote:
... plus I think a manual or something similar shoulda been sent, so that one's can get along with, but that was not the case here, again thanks.

no manual in the world could cover the issues you experienced - it's just that the protection under your special circumstances (whoever may be responsible) simply failed.

sorry that you'll miss a couple of great devices
cheers, Tom

dubcotics · Post by **dubcotics** » Thu Jan 13, 2005 2:45 pm

yes indeed Tom!

I miss something which costs less than Creamare High en devices and sounds great. That's why I'm being refunded cause Craig sure knows that it didn't work for me, cheers anyway Tom.

Liquid Len · Post by **Liquid Len** » Sat Jan 29, 2005 11:08 pm

What is the difference between the 'Lite' and 'Lite PCI' versions of this reverb?

Scott Majestik · Post by **Scott Majestik** » Thu Mar 03, 2005 1:45 pm

I have managed to get the plug in working with XTC mode but noen of the presets seem to work.

When I open up the preset list I get an error box saying nil_reference.......

Can the presests be used in XTC mode and if so what am I doing wrong ???

Thanks

Scott

grappa · Post by **grappa** » Wed Mar 16, 2005 5:20 am

Guys,

What is the best way to ensure that the latest versions of Warps software is installed?

I have P/C & A100.

I have looked on STW's site and nothing is listed in updates (and in fact no reference to the products seem to exist in updates or documentation).

I am sure I spotted some details about documentation somewhere - if someone could point me to this I would be eternally grateful.

Regards

astroman · Post by **astroman** » Wed Mar 16, 2005 5:53 am

On 2005-03-16 05:20, grappa wrote:
...
I have looked on STW's site and nothing is listed in updates (and in fact no reference to the products seem to exist in updates or documentation)....

good products need few to no updates at all

the most common 'updates' today fall into 2 categories:
#1
the product really needs it, because it was released as crap right from the beginning (at the full awareness of the manufacturer...)

this applies to at least 75% of all current software, usually due to tight schedules and budget pressure

#2
the product performs quite well, but symptoms of market saturation show up.
Instead of new customer aquisition, the existing ones are used as cash cows. Applies to almost all major brands...

cheers, Tom

grappa · Post by **grappa** » Wed Mar 16, 2005 12:35 pm

Thanks for the reply Warp.

The reason for my post was due to the fact that in the posts on this thread you mention a couple of times that you have made ammendments to c100?

Regards

Warp69 · Post by **Warp69** » Thu Mar 17, 2005 2:42 am

[ This Message was edited by: Warp69 on 2005-09-02 00:38 ]

rodos1979 · Post by **rodos1979** » Thu Apr 21, 2005 8:49 pm

Hello!

Where can I download the newest versions of P100 (Lite and Lite PCI)? I used to have them but I formatted my drive and found out that I have backed up on CD only the vey first version I received when I bought the plug-in..

Thanks

jea · Post by **jea** » Wed Jun 15, 2005 9:47 am

Censored by the lunatech jea himself

[ This Message was edited by: jea on 2005-06-15 14:02 ]

braincell · Post by **braincell** » Thu Jun 30, 2005 9:42 am

I wish there will an update to ambience because I simply can not run it on my system. For me it was a waste of money.

On 2005-03-17 02:42, Warp69 wrote:
Hey grappa,

You can find the latest version of the cd100 here : http://www.planetz.com/forums/viewtopic ... forum=10&7

There're no new updates for the P100/I100/A100. I will first release the H100/CH100 and then there might be a addon for the A100 - something like AmbienceChamber. The Early reflection system of the A100 combined with the reverb of a chamber algorithm - like the new reverb from Sony

Cheers

cannonball · Post by **cannonball** » Thu Jun 30, 2005 10:14 am

hi
here pa100 works well but i notice
no news from Warp69
i'm waitin the hall algo

ale

Kermit Jagger · Post by **Kermit Jagger** » Thu Jun 30, 2005 2:35 pm

Yes, I wonder what happened to H & CH100. Two I'll buy as I'm very happy with my A/P100.

Kermit Jagger · Post by **Kermit Jagger** » Thu Jun 30, 2005 2:36 pm

Yes, I wonder what happened to H & CH100. Two I'll buy as I'm very happy with my A/P100.