PlanetZ forums - scopeusers.com

You helped me ALOT, thank you very very much

Thanks!

Can you please try the following:
- put the gain of the HV3 on MAX.
- connect a condenser mic and speak loud (do not shout) so the overload led doesn't light on.

do you get any distorsion from the scopes output (on the speakers)? I do.

Hi,
as I wrote before, I use the compressor only to monitor the in levels . I do not use it to compress.
If I use the mixer (all faders on 0) the same problem happens: it clips above a certain TD1s gain.
the gain control of the mixer doesn't change the picture - it still clips. this is because it ...

The millenia puts out a balanced and unbalanced signal. Try the unbalanced signal output.If you have the pro i/o it should be fine with balanced outputs.

Thanks,
I use the unbalanced outs (my pulsar version is the unbalanced).

In the scopes software (4.5) I connected the analog source (the TD1 ...

Hi all!
I use my millennia TD1 preamp with my pulsar2.
The TD1 has lots of headroom - when I push its gain a little, checking on the dedicated TD1 headphone output the sound is clear, no distortion. BUT connecting it to the pulsar is another thing: it distorts! like the pulsar can't handle the large ...

Hi
Thanks but I just got one

Thanks
I talked with sonic core and they will sell me the STDM cable.
They told me I need only ONE cable in order to connect 2 pulsar-II cards.. is it true? just to b sure

Ya, I'm going to buy the creamware, not the ada8000.
If you know someone who sells/gives an STDM cable then I need one.
another thing: to connect my pulsar 2 with another pulsar 2 how many STDMs do I need?

Thanks!

Hello!
I need an STDM cable to connect 2 pulsarII cards.
Please contact me if you have one to give/sell.

Thanks!

Ori
luminalweb@gmail.com

I thought so but wasn't sure.
Thanks!

My preamp is the MILLENNIA TD1 - a top quality device which has also a mastering quality EQ. it can not be replaced with plugins..

I'm confused... I want the signal to pass through the best converters of those 2: ada8000 or the lunas/pulsars. I can get a luna card for 50$, less than 1/3 the price ...

I need the other luna ONLY for its I/Os, not for DSP

thanks

thanks
Last questions please:
Can I connect a luna card to my pulsar2 via STDM? I will be able to use its ins/outs?
The luna has the same converters as the pulsar, only less DSP right?

Thanks!
Ori

thanks!
How is the STDM performance? is it stable?
I would please like to here also opinions from those (if there are) who have experience with both the ADA8000 and the pulsar2

Thanks again!

Hi all!
I have pulsar2 card, and need extra 2 analog outs, inorder to pass single tracks from my DAW into an external compressor/eq and back to the DAW.
The problem is I have a very limited budjet and therefore I have 2 options:
1 - buying the Behringer ADA8000 and use its line outs.
2 - buy a used ...

GREAT thanks

Hi all!
Yesterday I reinstalled my whole computer system.
I run pulsarII (scope 4.5) under winXP.

The strange thing is that when windows starts scope loads but dont minimize.. when I enter the scope program and click on "startup" it works just fine and automaticly minimize.

How can I fix it? It's ...

tried the process.exe file but nothing...
is seems that when I open a project that is a little too "heavy" for the computer (because of the problem ofcourse) it plays normaly, without blu screens or system crashes, but with no sound at all.

mm... what can I do to fix this?
It's making me crazy :(